- HITACHI VHS Instruction Manual VM-1800A VM-2800A VM-3800A

AUDIO DUBBING

The audio dubbing feature lets you record new audio (sound) on a previously recorded

tape without erasing the original video.

When you audio dub a tape, the previous audio is erased and replaced with new sound.

NOTES:

 Sound from the built-in microphone and the AUDIO jack can be dubbed.

 When dubbing audio from the built-in microphone, set "AV OUT/IN" switch to "OUT" and

do not connect the "AUDIO" jack. When dubbing audio from the "AUDIO" jack, set the

"AV OUT/IN" switch to "IN".

1. Insert a recorded tape. Be sure that the record safety tab is not missing.

2. Place "POWER" switch to "VIDEO" position.

3. Play the tape and press "REC/PAUSE" button where you want to dub audio.

 The camcorder enters the still play mode.

4. Press "DUBBING AUDIO/VIDEO" and "PLAY" buttons at the same time.

 "A.DUB " appears in the viewfinder.

NOTE: If "DUBBING AUDIO/VIDEO" and "PLAY" buttons are pressed twice, audio and

video dubbing will start. In this case, press "STOP/EJECT" button to release the dubbing

mode.

5. Press "RECORD/PAUSE" button to start audio dubbing.

6. Press "STOP/EJECT" button to stop audio dubbing.

NOTE: If counter memory "M" appears in the viewfinder, the tape stops automatically at

the reading of "0000" and audio dubbing stops.