- HITACHI VHS Instruction Manual VM-1800A VM-2800A VM-3800A

VIEWING THE PICTURE PLAYED BACK ON YOUR TV

To play back a tape recorded on your camcorder and view it on your TV receiver, you

must connect the camcorder to the TV receiver using either audio/video cable (supplied

only with VM-3800A) or RF converter unit (optional).

You also may play back the tape recorded by your camcorder on any other VHS video

cassette recorder. The camcorder records and plays back in VHS standard speed (SP).

A tape recorded in long play (LP) or extra long play (EP) cannot be played back on this

camcorder.

Example 1: If your TV has "VIDEO IN" and "AUDIO IN " jacks,

1. Connect the audio/video cable to "AUDIO IN" and "VIDEO IN" of your TV.

2. Connect the other end of the audio/video cable to "AUDIO" and "VIDEO" of your

camcorder.

3. Turn on your TV.

4. Set "AV OUT/IN" switch to "OUT" position.

5. Press "STOP/EJECT" button on the camcorder and then insert the cassette.

6. Place "POWER" switch in "VIDEO" position.

7. Press "PLAY" button.

8. After playing press "STOP/EJECT" button.

Tracking adjustment

When playing prerecorded tapes or tapes recorded by the recorders other than your