- HITACHI VHS Instruction Manual VM-1800A VM-2800A VM-3800A

MEMORY

When the tape counter with memory indication appears in the viewfinder, a tape that is

being rewound automatically stops when the counter reads approximately "0000". This

is useful if there is a section of tape you want to review immediately after recording or if

you want to return to the same point several times in a row.

1. Press "DISPLAY" button. (The indicator "M" appears beside the tape counter.)

2. Start playing or recording a tape.

3. At the point you want playback to start, press "RESET" button to reset the counter to

"0000M".

4. Continue to play back or record.

5. Press "STOP/EJECT" button to stop playback, or press "REC/PAUSE" button to

stop recording and place "POWER" switch in "VIDEO" position.

6. Press "REW" button. The tape will be rewound to the preselected point, at

approximately "0000M" indication.

NOTE: The tape will also stop approximately at "0000M" during fast forward mode.

CAMCORDER TO VCR DUBBING