- HITACHI VHS Instruction Manual VM-1800A VM-2800A VM-3800A

FLYING ERASE HEAD

If you wish to exchange or copy some of your friend's favorite home recordings, the

following instructions can be used to connect camcorder to VCR for this purpose.

1. Connect the audio/video cable to "AUDIO" and "VIDEO" of your camcorder.

2. Connect the other ends to "AUDIO IN", "VIDEO IN" of your VCR as shown in the

diagram above.

3. Set "AV OUT/IN" switch to "OUT" position.

4. Play the tape on the camcorder and record it on the VCR.

NOTE: If you connect the "VHF OUT TO TV" connector of VCR to the "TV ANT"

connector, as illustrated and set VCR to "VCR" mode, the picture being dubbed by VCR

can be monitored.

FLYING ERASE HEAD

A rotating erase head which eliminates glitches and rainbow noise that occurs at the

joints between recorded segments.

ATTACHING THE OPTIONAL TELE OR WIDE CONVERTER LENS

1. To remove the lens hood, turn it counterclockwise as shown in the figure.