Instruction Manual Camcorders VM-8400LA

ACTIVE SCREEN
16
NOTES:
• The AC adaptor/charger cannot charge the battery and operate the camcorder at the same
time.
• When using the AC adaptor/charger to power the camcorder, the battery level indicator may
display " ". This indicator is used for battery operation and has no meaning when using the
AC adaptor/charger to power the camcorder.
 WHEN USING WITH THE CAR BATTERY (By using optional car battery cord Hitachi
VM-CC70A)
1. Connect the small plug of the car battery cord to the "DC IN 9.6V" jack of the camcorder.
2. Connect the other end of the car battery cord to the car's cigarette lighter socket.
NOTES:
• The car battery cord is designed to be used only with automobiles having a 12-volt negative
ground system.
• To prevent fire or shock hazard or damage to your camcorder, please use only the specified
car battery cord.
CHECKING THE BATTERY
When the " " indication appears in the viewfinder or LCD monitor and flashes while the
camcorder is being operated with a battery (provided), it indicates that the battery charge is
low. Charge it or replace it with a charged battery.
Press the "DISPLAY" button. The remaining battery power level will appear in the viewfinder
or LCD monitor.
When the battery is fully charged, is displayed. After several minutes, the symbol will change
to "
". When the battery is very near empty, the symbol will change to " " and start blinking.
You should find an alternative power source or recharge the battery before continuing to use
your camcorder.
NOTE: When a battery pack is used to power the camcorder, " " flashes even if "DISPLAY"
is not pressed to warn you that the battery power level is low.