Instruction Manual Camcorders VM-8400LA

DIGITAL EFFECTS RECORDING
38
viewfinder or LCD monitor.
The image in the viewfinder or LCD monitor will become negative.
3. Press "REC/PAUSE" to start recording.
• To release the negative mode, press "DIGITAL EFFECT" repeatedly in recording pause until
normal mode is restored.
X200 Digital Zoom Recording
1. Place the camcorder in record pause.
2. Press "DISPLAY" and repeatedly press "DIGITAL EFFECT" until "ZM: 2" appears in the
viewfinder or LCD monitor.
3. Press and hold the power zoom "T" control until you reach your desired magnification.
4. Press "REC/PAUSE" to start recording.
• To release the X200 digital zoom mode, press "DIGITAL EFFECT" repeatedly in recording
pause until normal mode is restored.
• This function can magnify the image up to 200 times when instant zoom is used at the same
time.
Half-mirror Recording
1. Place the camcorder in record pause.
2. Press "DISPLAY" and repeatedly press "DIGITAL EFFECT" until "MIRROR" appears in the
viewfinder or LCD monitor.
The image in the viewfinder or LCD monitor will change to a symmetric image on the left and
right, obtained by placing a mirror at the center of the screen.
3. Press "REC/PAUSE" to start recording.
• To release the half-mirror mode, press "DIGITAL EFFECT' repeatedly in recording pause
until normal mode is restored.
NOTE: This function cannot be used with digital zoom, instant zoom, stable pix or zoom fade
function.
Mosaic Recording
1. Place the camcorder in record pause.
2. Press "DISPLAY" and repeatedly press "DIGITAL EFFECT" until "MOSAIC" appears in the
viewfinder or LCD monitor.
The image in the viewfinder or LCD monitor will be in mosaic.