Instruction Manual Camcorders VM-8400LA

USING THE BUILT-IN CAMERA
54
• Replace only with the specified lamp (optional) to reduce the risk of fire.
To replace the lamp of camera light
To remove the front case, press and hold the tab, then remove the front case.
To replace the front case, pass the lamp through the hole of the reflection plate then attach
the upper hooks to the camera light, and then attach the lower hook to the camera light.
NOTES:
• Do not touch the lamp directly with your fingers.
It may shorten its service life.
• When the lamp is replaced, or when the front case of the camera light is removed, make sure
the front case is attached to the camera light properly.
• Consult your nearest service center to replace the lamp.