Table of Contents 1 HITACHI Video Deck VT-F372A Owner's Manual Your Complete Guide to Videocassette Viewing and Recording Using these quality features: VHS hi-fidelity sound in playback Automatic tape head cleaning Up to 8 delayed recording programs Auto tracking for improved picture in playback Cable-compatible frequency synthesizer quartz tuner Illuminated remote control for use with your VCR, TV and cable converter All basic playback functions on convenient shuttle control On-screen programming guide
Table of Contents Table of Contents FOR YOUR SAFETY ............................................................................................................................... 5 Read This First.......................................................................................................................................... 6 IMPORTANT SAFEGUARDS................................................................................................................. 9 Getting Started.....................
Table of Contents Special Playback Effects ................................................................................................................... 34 To Find Specific Sections on a Tape............................................................................................... 36 Basic Operations (Recording) .............................................................................................................. 39 Recording a Program......................................................
Table of Contents Don't Attempt Repairs Yourself ........................................................................................................ 68 Care and Servicing (Problems) ............................................................................................................ 69 Hitachi Service Hotline....................................................................................................................... 70 SPECIFICATIONS ....................................................
FOR YOUR SAFETY FOR YOUR SAFETY POWER SUPPLY: AC 120V, 60 Hz ONLY. The POWER switch turns the VCR on and off, leaving the clock/timer unaffected. If the unit is to be left unattended for a long period, it is recommended that the unit be completely switched off and unplugged. Illustrated below is the label on the back of your unit. This symbol warns the user that uninsulated voltage within the unit may have sufficient magnitude to cause electric shock.
Read This First This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus set out in the Radio Interference regulations of the Canadian Department of Communications.
Read This First Instructions in French and Spanish.....19 Problem chart.....
Read This First 8
IMPORTANT SAFEGUARDS IMPORTANT SAFEGUARDS In addition to the careful attention devoted to quality standards in the manufacture of your video product, safety is a major factor in the design of every instrument. But, safety is your responsibility too. This page lists important information that will help to assure your enjoyment and proper use of a Video Cassette Recorder and accessory equipment. Please read it carefully before operating your video product and keep it in a handy place for future reference.
IMPORTANT SAFEGUARDS a risk of fire or electric shock. Overloaded AC outlets and extension cords are dangerous, and so are frayed power cords, damaged or cracked wire insulation and broken plugs. They may result in shock or fire hazard. Periodically examine the cord and have it replaced by your service technician if appearance indicates damage or deteriorated insulation.
IMPORTANT SAFEGUARDS near a bath tub, wash bowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool, and the like. 11 Accessories -- Do not place this video product on an unstable card, stand, tripod, bracket or table. The video product may fall, causing serious injury to a child or adult, and serious damage to the appliance. Use only with a cart, stand, tripod, bracket or table recommended by the manufacturer, or sold with the video product.
IMPORTANT SAFEGUARDS 16 Lightning -- For added protection for this video product during a lightning storm, or when it its left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable-system. This will prevent damage to the video product due to lightning and power-line surges.
IMPORTANT SAFEGUARDS SERVICE 17 Servicing -- Do not attempt to service this video product yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel. 18 Conditions Requiring Service -- Unplug this video product from the wall outlet and refer servicing to qualified service personnel under the following conditions. a. When the power-supply cord or plug is damaged b.
Getting Started Getting Started Relax. Using a VCR is very straightforward. This sections explains how to hookup the VCR, quick tour of the controls, set up for first-time operation using on-screen menus, and videocassette tapes. Enjoy getting to know all about your Hitachi VCR. Let's get started. Simple Hookups 1 Decide Where to Put Your VCR Be sure your chosen location allows for proper ventilation, stability, and protection from heat and moisture (see Important Safeguards).
Getting Started Any other devices you want to include in the system (stereo, second VCR, etc.) We will guide you through the process. But first, turn the TV and the VCR around so you are looking at their backs. Note the various input and output receptacles, their shapes, and how they are labeled. Then read through the rest of this hookup section before proceeding to an actual hookup. DO NOT TURN ON THE POWER YET. FOR YOUR SAFETY, LEAVE YOUR TV AND VCR UNPLUGGED WHILE HOOKING THEM UP.
Getting Started electronic signal won't have to go through a conversion process. Plus your VCR has a stereo decoder, which your TV might not. For big speaker sound, you can also use these jacks to connect the VCR to your stereo system (page 54). Capabilities: The audio and video signal connections are all you need to play back a prerecorded tape. If you do not intend to record on your VCR from your antenna/cable, then you're all hooked up now.
Getting Started TV jack on the back of the VCR. 4. Connect the other end of the same cable onto the 75 ohm antenna input on your TV (where you first disconnected the TV in step 1.) Capabilities: With this hookup, you should now be able to perform all the basic functions provided by this equipment. External or Internal 300 Ohm Antenna If you have either an external or internal (rabbit ears) antenna rather than cable, you may have 300 ohm connectors like these.
Getting Started Single 300 ohm flat wire Separate UHF and VHF antenna wires, both 300 ohm flat wire 300 ohm flat UHF and 75 ohm round VHF If you have "rabbit ears" (an antenna on top of your TV), you will need an additional adapter and 75 ohm extension to make your leads reach from the antenna to the VCR. This connection will work only if you have a strong, clear picture on the TV, indicating a strong signal.
Getting Started 1. Using whichever adapter you have fit your antenna with, attach that connector to the IN FROM ANT jack on the back of the VCR. 2. Using the 75 ohm cable supplied with your VCR, connect either end to the OUT TO TV jack on the back of the VCR. 3. Use a second adapter to attach the other end of the 75 ohm connector back into the TV (where you first disconnected the antenna). Capabilities: With this hookup, you should now be able to perform all basic functions provided by this equipment.
Getting Started When the VCR is on, its video signal can come into your TV on either channel 3 or channel 4. You need to select the appropriate channel. Turn the power on to both the TV and the VCR, and look for a switch on the back of the VCR. Set the switch to 3 or 4, whichever is not a commercial channel in your area. Your basic hookup is now complete. When you're ready to try hooking up a second VCR or a video camera for a complete home entertainment system, see Advanced Operations.
Getting Started (Controls) Getting Started (Controls) Quick Tour of the Controls Study these pictures carefully to learn about the buttons and controls that you'll need for everyday operation. Various controls are explained throughout this manual as they are needed, but now is a good time to get familiar with their locations. Most of the time, you'll be directing the VCR from the remote control, but there are some controls on the VCR that will come in handy too.
Getting Started (Controls) device you are controlling at the moment. Remote Control Illustration Remote Control Buttons POWER Turns the VCR on and off. VCR1, TV CATV, VCR2 Device buttons let you set the remote to control one of four devices. MUTE Turns off the audio until you press MUTE again. VOLUME Increase or decrease the audio volume. REW Rewinds the videotape. PLAY Starts playing a loaded cassette. STOP Stops a videocassette from playing, recording, pausing, rewinding - or anything it is doing.
Getting Started (Controls) TRACKING Lets you fine tune the picture. 0 to 9 Number buttons used in on-screen programming. Can also be used to change channels. (Simply press 2 or 3 digits for the channel you want - such as 0 and 6 for channel 6, or 100/ENT and 2 and 4 for channel 124.) VCR/TV Switches between viewing through the VCR and not viewing through the VCR. LIGHT Illuminates key function buttons for a few seconds.
Getting Started (Controls) VCR Controls POWER Turns VCR power on and off. STOP/EJECT Cancels any videotape action, and when pressed a second time, ejects tape. PLAY Play the loaded videotape. SHUTTLE Controls the videocassette's forward and reverse motion with one convenient dial. DISPLAY Shows time, channel, and status indicators. CHANNEL Up and down arrows for selecting channels. REC/IRT To begin recording. PAUSE To interrupt play or recording. Press again to resume.
Getting Started (Controls) Your Hitachi VCR has as a special feature called the Easy Guide System. This feature guides you through simple setup and programming tasks right on the TV screen. With the TV and VCR turned on, press GUIDE on the remote control. You will see this screen: You may view all the on-screen instructions in English, French or Spanish. When you first set up your VCR, it will be set to English. Press number 8 or 9 for the other language options.
Getting Started (Initial Setup) Getting Started (Initial Setup) Setup for First-Time Operation Before you use your VCR to watch or record from your TV, you need to "tell" the VCR whether your TV uses cable or antenna input and let it program itself to receive your TV's channels. It's also a good idea to set the clock so you can do timed recording later. With your TV and VCR hooked up, turn them both on and follow these steps using the remote control.
Getting Started (Initial Setup) Here is what the options mean: 1 ANTENNA/CABLE Press 1 to select the type of receiving setup you have: Internal or external antenna Ordinary cable Alternate cable (if CATV1 doesn't give you the channels you expect) 2 AUTO CHANNEL SETTING Press 2 to automatically program the VCR to receive all the channels that come in on your antenna or cable.
Getting Started (Initial Setup) To set the clock, press GUIDE, then press 6 to bring up the Clock Set screen: Press the number buttons on the remote control to set the current time - two digits for the hour and two for the minutes. Then press 1 or 2 for AM or PM, respectively. For example, if it is now 2:15 PM, press 0, 2, 1, and 5 for hours and minutes, and press 2 for PM. Continue pressing buttons to set the date. For example, if today is July 8, 1994, press 0, 7, 0, 8, 9, and 4 to get 07/ 08/ 94.
Getting Started (Initial Setup) For convenience, the TV channel numbers should match those programmed into the VCR. If your TV has automatic channel programming, set it on the same mode - ANT, CATV1 or CATV2 - and let it reprogram to match the VCR. Once channels are preset, you can use the up and down CHANNEL buttons to move through the active channels. Or you can press the number buttons to move quickly between channels that are far apart.
Getting Started (Initial Setup) STEREO is the normal factory setting because it works for both stereo and mono broadcasts. It is also necessary for recording a second audio program (SAP). When you select MONO, sound is recorded as mono even when a channel broadcasts in stereo. Use the MONO setting when the stereo signal is not strong enough for quality reception (for example, when there is signal drift or noise). Hi-Fi Sound Choose between hi-fi and linear modes, depending on your needs.
Getting Started (Videotapes) Getting Started (Videotapes) About Videocassette Tapes Types The best thing you can do for your VCR is use the best quality tapes available. This VCR uses VHS tapes only, which are the most common type. Look for the VHS mark on new or prerecorded tapes you buy. Tapes are marked either T-120 or T-160, which signifies how many minutes of programming they can hold at standard recording speed (SP). To get the best quality picture, record at standard speed.
Getting Started (Videotapes) Loading and Ejecting When you load a videocassette into the VCR, there is only one right way! Most tapes show you the way with a little arrow on the top side which should go in first. Push the videocassette gently into the slot on the front of the VCR. You will feel the VCR take it in. When the cassette is all the way in, the VCR powers up automatically and a TAPE-IN indicator shows on the display. It may also start playing immediately if the safety tab has been removed.
Basic Operations Basic Operations Practice starting and stopping a video you've rented - play it through, see how it automatically rewinds. Get a blank tape and try recording a TV show. Then you'll know how to use the VCR when you need to - or where in the manual to find the instructions you forgot. Let's go! Viewing a Videocassette To play Back a Recorded Tape 1. Insert the cassette, arrow-side forward, into the slot at the front of the VCR.
Basic Operations Manual Tracking Scratched tapes or poorly recorded tapes may require additional picture adjustment. You can do this with the remote control. Press either of the TRACKING buttons (down or up arrows) until picture clears up. After operating the tracking manually, eject the tape and reinsert it to reactivate auto tracking. Rewinding the Tape When you are done watching a video, you can rewind the tape automatically or manually.
Basic Operations While in PAUSE mode during playback, press F.ADV to view the video one frame at a time. Press PAUSE to resume play. Skip Playback While playing back your tape you can skip forward by pressing the FRAME ADVANCE button. The tape will search ahead for about a minute and then resume playing. Slow Motion To slow the playback speed to exactly the pace you want, press PLAY, then one of the SLOW SPEED buttons. Press minus (-) to slow down, press plus (+) to speed up.
Basic Operations If noise bars appear on the TV screen during SLOW/STILL mode, first set the VCR to SLOW mode and then press the TRACKING control buttons ( or ) on the remote control to minimize the noise bars. The noise bars are then eliminated automatically in the STILL mode. To Find Specific Sections on a Tape Visual Search This function lets you search backward and forward through the videotape while viewing it. Using the buttons on the VCR: Press PLAY and then REW to search in reverse.
Basic Operations If there is one part of the video that you know you are going to want to return to, you can set the time counter to memorize that spot. Begin in either STOP or PLAY mode. Press DISPLAY twice to show the counter on the TV screen. (If you want the counter to appear on the VCR's display too, press DISPLAY three times.) Begin recording or playing back a tape. Notice the counter remains on the screen. At the point that you want to go back to, press CLEAR. This resets the counter to 0:00:00.
Basic Operations A quick way to access specific program segments is with the index search feature. This lets you move through a tape that has several recordings on it by searching for the INDEX "mark." This function only works with recordings that have been set up with indexing. You create an INDEX mark every time you press the REC button while recording. For more on how this gets recorded, see the section on Recording a Program (page 33).
Basic Operations (Recording) Basic Operations (Recording) Recording a Program Before you Record The VCR must be hooked up properly for recording. See the Simple Hookups at the beginning of this manual. Make sure you are familiar with the Easy Guide System for on-screen programming (page 19) and the basics about videocassettes and VCR safety. Copyright Infringement Warning Most television programs and films are copyrighted.
Basic Operations (Recording) Recording will start unless the cassette is protected with the safety tab. If this tab has been removed, the VCR will eject the tape to prevent recording over what is there. (See About Videocassettes for more about preventing tape erasure.) Recording Tips To Watch the Same Program While Recording To view what you are recording, press VCR/TV so that the VCR is selected - the VCR indicator will light up on the VCR's display.
Basic Operations (Recording) To Leave Index Marks on the Tape This feature is useful when you are recording several programs on the same tape. It helps you quickly find the beginnings of the shows during playback (page 32). You create the index "mark" every time you begin recording by pressing REC. To leave an index mark between shows, simply press STOP at the end of each show, then press REC to record the next show. (Pressing PAUSE during recording does not leave an index mark.
Basic Operations (Recording) Setting the VCR to Record Later With the delayed recording feature, you can set this VCR so that it automatically comes on and records programs whenever you like - without your being around! You can record a program one time only, or you can automatically record a show every weekday or every week at the same time. You can preset as many as 8 timed recordings at once. Recording is even easier when you have set up your channels for VCR Plus+.
Basic Operations (Recording) example, 0 and 6 for channel 6. After you enter the channel and time, the VCR automatically shows the current date or the next date, whichever is most logical. Leave the date as it comes up, or enter new digits for the month and day. You can correct any item entered as you go by pressing the CLEAR button repeatedly until the digit to be corrected flashes on the screen. Then, punch in the correct number. Illogical times and dates won't be accepted.
Basic Operations (Recording) Press TAPE SPEED to switch to SP because you want the best quality picture for this recording. Everything is as you want it, so press GUIDE to set the program in memory. Insert a videocassette, and power off the VCR. Check for the delayed recording indicator on the VCR's display. Prepare to admire yourself on the evening news. Reviewing What You Have Programmed You can look back over any of the recordings you have preset, and if you need to, clear out any of the programs.
Basic Operations (Recording) starting time. To avoid recording only bits and pieces of different overlapping shows, review your programming and delete those shows that are not essential.
Basic Operations (VCR Plus + Recording) . Basic Operations (VCR Plus + Recording) . Easy Delayed Recording with VCR Plus + About VCR Plus+ This handy feature makes timed recordings a snap. You don't need to enter the specific channel, date, time, or duration of a program. All you enter is its PlusCode - a number of up to eight digits. This special code is easy to find in your favorite TV program guide or a daily newspaper. Here's a sample page from TV Guide showing PlusCodes next to each program.
Basic Operations (VCR Plus + Recording) . 3. If you don't get cable TV, make a list of all the broadcast channel numbers you receive on your TV - for example, channel 4 WTTV (Ind.), channel 20 WFYI (PBS). 4. If you subscribe to cable TV, have your cable company's channel directory handy. This should list all the channels as you receive them in your home, for example: Channel 34 Arts and Entertainment Network Channel 35 Turner Network Television Channel 36 ESPN 5.
Basic Operations (VCR Plus + Recording) . program guide to your list of channels that you receive at home. If any channel numbers don't match, follow the steps (page 43) to assign your local channel numbers to VCR Plus+ numbers. Cable (No Cable Box) This is the channel setup to use if your VCR is hooked up directly to cable without a cable box. Compare your local TV channel listing to your cable company's channel directory to find channels that need to be assigned to the VCR Plus+ codes.
Basic Operations (VCR Plus + Recording) . arrow. 3. If your broadcast channel number is not the same as the VCR Plus+ channel in your TV listing, use the number buttons to assign the broadcast channel to the corresponding VCR Plus+ channel. If you enter a wrong digit, press CLEAR and enter the correct one. In the example below broadcast channel #38 is assigned to VCR Plus+ channel #42. 4. Repeat step 3 for all channels that need to be assigned. 5. Press GUIDE to end the setup procedure.
Basic Operations (VCR Plus + Recording) . Some of your cable channels through a cable box (scrambled premium channels), and Some of your channels (unscrambled) directly through the cable Before you begin, you need to know which cable channels you receive through your cable box. You also need to know the output channel number for your cable box. Usually this is either 03 or 04, but it could be 02, 05 or 06. Consult your cable company if you're not sure. 1.
Basic Operations (VCR Plus + Recording) . 2. Use the number buttons to enter the PlusCode of the program you want to record. This code can be up to eight digits. If you enter a wrong digit, press CLEAR and enter the correct one. 3. If you accidentally enter a nonexistent PlusCode, the VCR gives you an error message that disappears from the screen in about 10 seconds. 4. If you have entered the correct PlusCode, press GUIDE to store the PlusCode in the VCR's memory. This brings up another screen: 5.
Advanced Operations 7. Review the screen to be sure everything is set as you want, then press GUIDE to complete your programming or continue with additional programs. When you have set up all the timed recordings you want: Don't forget to load a videocassette (with the safety tab still attached) to record on.
Advanced Operations with every one made. If your TV or cable box does not respond the way it should when you program it as explained below, this remote may be incapable of operating it. Once you have programmed the remote, you won't have to do it again until you change the batteries. This Hitachi remote control can be used with your TV as well as the VCR, as long as your TV comes with a remote control. This feature comes in handy - you don't have to juggle two remotes.
Advanced Operations Gold Star 1 6 Toshiba 7 Gold Star 2 8 NEC 9 RCA 0 Panasonic CHANNEL (up arrow) Mitsubishi CHANNEL (down arrow) JVC 100/ENT Sharp 1 LAST CH Sharp 2 DISPLAY Controlling the TV Once programmed, the VCR's remote control is ready to control the TV. First press TV to change to the TV function mode, then press the button of the TV function that you want. For example, press TV and the CHANNEL up arrow, and the TV station will change to the next higher station.
Advanced Operations (Cable Box Hookups) Advanced Operations (Cable Box Hookups) Hooking Up to a Cable Box The cable box brings all the advantages of pay cable, but finding a satisfactory hookup can be challenging. To sort out what to do, we suggest a step-by-step approach to installation. You will need RF TV splitters, coaxial cable jumpers, and possible RF switches to try various configurations.
Advanced Operations (Cable Box Hookups) Option 1 - All Channels Scrambled 1. Remove the cable company's cable line from the back of your TV. Connect it to the IN FROM ANT lower jack on the back of the VCR. 2. Using the 75 ohm coaxial cable supplied with your VCR, connect either end to the VCR's OUT TO TV upper jack. 3. Connect the other end of the 75 ohm cable to the TV, in the same place where you removed the cable line. Check all the TV and VCR functions.
Advanced Operations (Cable Box Hookups) Option 3--Some Channels Scrambled This hookup requires three coaxial jumpers with connectors, a 1-into-2 splitter, and an A-or-B switch box. 1. Disconnect the cable from the cable box and attach it to the input line of the 1-into-2 splitter. 2. Using a coaxial jumper, reconnect one of the splitter outputs to the cable box's input that you just freed up. 3. Using a second coaxial jumper, connect the other splitter output to the A of the A-or-B switch. 4.
Advanced Operations (Cable Box Hookups) Hamlin 4 Zenith 5 Scientific Atlanta 6 Pioneer Philips 7 8 To operate the cable box once the remote is programmed for it: Press CATV and then the button of the function you want. Press VCR1 to operate your VCR with the remote again.
Advanced Operations (Stereo System) Advanced Operations (Stereo System) Integrating Your Stereo System There are several reasons to consider hooking up your stereo system with your TV and VCR. If your TV does not have stereo, you can get stereo quality from your VCR by hooking it to your stereo receiver. Even if your TV does have stereo, you can get better sound by taking advantage of your stereo's better speakers.
Advanced Operations (Stereo System) cassette into the VCR. Be sure that HIFI is selected in the Initial Setup screen of the Easy Guide System. Press DISPLAY, then press 5 on the remote control to select SP or EP. The EP setting gives you reasonable quality and a longer tape program. Press AVX on the remote control to turn the LINE (L1) indicator on. Press REC/IRT on the VCR and start the stereo playing. To stop recording, press STOP. To play back the recording, rewind the tape and press PLAY.
Advanced Operations (Second VCR) Advanced Operations (Second VCR) Integrating a Second VCR With another VCR hooked up, you can copy videotapes as needed, and you can get fancy with multimedia programming. For this discussion, we refer to the model VTF372A Hitachi as VCR2 and the other unit as VCR1.
Advanced Operations (Second VCR) Insert the videotape you wish to record in VCR2. Insert a blank or erasable tape (with the safety tab intact) into VCR1. Press AVX on VCR1 - the LINE indicator will display. Press REC on VCR1, and press PLAY on VCR2. To monitor the picture as you record, VCR1 must be connected to your TV (follow instructions in the other VCR's manual). Press the VCR/TV button on the remote. The VCR indicator will light on VCR1's display and you can view the picture being recorded.
Advanced Operations (Synchro Editing) Advanced Operations (Synchro Editing) Synchro Editing Tape copying is much easier if you can connect VCR1 and VCR2 with a synchro edit cable. This lets you use a single set of controls to govern both VCRs. We assume that VCR2 is your model VT-F372A. This is the playback VCR. The other VCR must be a Hitachi and must have a jack labeled EDIT. This is the recording VCR. You will need to purchase a synchro edit cable. You may order by calling 1-800HITACHI.
Advanced Operations (Synchro Editing) Insert the cassette you want to copy into VCR2. On VCR2, press PLAY. Locate the place on the tape where you want to begin copying, then press PAUSE. Insert a cassette (with its safety tab intact) into VCR1. Put this VCR in RECORDPAUSE mode, and press AVX to put it in LINE mode. Press PAUSE on VCR2 (the playback VCR) to start the recording. Both tapes will start together. Press PAUSE again on VCR2 when you want to stop. Both VCRs will pause.
Advanced Operations (Synchro Editing) Select the start point of the section of the program that you want to copy. You can locate the beginning of the program by using the shuttle dial or the PLAY, REWIND, or FAST FORWARD controls. When you have located the start point of your edit press the EDIT button on the remote. The current time counter is registered. Locate the end point of your edit using the shuttle dial or remote control functions then press EDIT on the remote control.
Advanced Operations (Camcorder) Advanced Operations (Camcorder) Copying Tapes From a Camcorder If you would like to copy a video tape shot in your camcorder onto your VCR here's how to do it. Connect the camcorder's AV output cable to your VCR. (see diagram below) Camcorder Hookup Illustration Press the AVX button on the VCRs remote control so that the L2 (Line) indicator appears in the VCR display. Press REC/IRT on the VCR to start recording. Press PLAY on your camcorder to start copying your tape.
VCR Care and Servicing VCR Care and Servicing The VCR is fairly self-servicing, but you'll want to keep an eye on a few things as you go. In addition, you may sometimes have troubles with your VCR. We offer some suggestions for care to prevent problems, ways to troubleshoot, and places to contact when you cannot solve the problems yourself. Routine Cleaning Head Cleaning The heads are tiny mechanisms in the VCR that pick up the video signal as a videotape passes over them.
VCR Care and Servicing If the VCR Doesn't Work Right Many operational problems are easily remedied by reviewing the instructions in this manual and trying out some different controls and settings. The chart on the facing page covers the more common problems that new VCR owners encounter. Don't Attempt Repairs Yourself Do not remove the cover or the back of the VCR - this will void the warranty and endanger your safety.
Care and Servicing (Problems) Care and Servicing (Problems) OFTEN ENCOUNTERED PROBLEMS PROBLEM THINGS TO CHECK No Power Power cord plugged in? Delayed recording does not work. Program set to the correct channel? Program time and date set correctly? VCR power turned off? Does not record when you press REC and PLAY at the same time/ Safety tab removed from the videocassette TV program cannot be viewed or recorded.
Care and Servicing (Problems) Mechanical sounds during the STOP Has a loaded cassette been stopped more than 5 minutes? Nothing is wrong. The tape protection mechanism is working. Eject the cassette if you are done viewing. Otherwise, no action is necessary. Hitachi Service Hotline Authorized Hitachi service facilities are available throughout the US and Canada. For the location nearest you, call the Hitachi Service Hotline at one of these numbers: In the continental U.S.A.
SPECIFICATIONS SPECIFICATIONS Technical Specifications Recording: Video: Cassette: Heads: Tape Speed: Tape Width: RF Output: RF Input: Tuning Range: Video Input: Video Output: Audio Input Audio Output Video Recording S/N: Horizontal Resolution: lines (EP) Audio Response: Audio S/N: Hi-Fi Audio: Power Input: Power Consumption: Cabinet Size: 71 Rotary two-head helical scan azimuth recording NTSC color EIA standard VHS type 4 video heads 2 for SP, 2 for EP 2 hi-fi audio heads 1 full track audio/video er
SPECIFICATIONS Weight: Accessories: 38.0cm (W) x 8.2cm (H) x 33.4cm (D) 11.7 lbs. (5.3 kg) 1 coaxial cable (Part No. 5861141) 1 remote control unit (Part No. 5616491), 2 AA batteries For information about how to obtain these accessories, please call TOLL FREE 1-800448-2244 for your nearest Hitachi Authorized Parts Distributor in the continental United States. For ALASKA and HAWAII, please contact the nearest Hitachi Regional office.