Manual

Often Encountered Problems

Problem Things to Check Solution

No Power Power cord plugged in? Connect the power cord to

AC outlet.

Delayed Recording does Program set to the correct Reset the delayed

not work. channel? recording.

VCR power turned off/ Turn power off to activate

the timer.

Safety tab removed from Put cellophane tape over

the videocassette? the tab area, or use a

videocassette with the

safety tab intact.

Turn power off to activate

the timer.

Set the time, then program

delayed recording.

Delayed recording does

not work even when the

clock is set correctly.

VCR power turned off?

Clock set to "--:--"?

Has power failure of more

than one hour occurred?

Does not record when you

press REC.

Safety tab removed from

the videocassette?

When the autoclock set

function is operating, the

time may be reset even

after a power failure of

more than one hour.

However, programmed

delayed recordings will

have been cleared and

must be reset.

Put cellophane tape over

the tab area, or use a

videocassette, with the

safety tab intact.