Manual

TV program cannot be viewed Loose or inappropriate Review hookup directions and
connection make correct, firm
connections.
Poor- picture ("noise") quality. TV channel selector on the Set TV to channel 3 or 4 as
proper channel? correct for your area during
playback. (Set TV to AUX or
video if you have a direct
video hookup.)
Is TV correctly tuned? Fine tune the TV.
Static lines through the Press 1 or 4 button to adjust
picture? tracking.
"Noisy" picture despite all Have video heads cleaned by
previous adjustments, even a qualified service technician.
when playing different
cassettes?
No picture during playback. TV set to the correct video Set TV to channel 3 or 4.
viewing channel?
TV cannot be operated by the Is VCR remote control Follow instructions in
VCR's remote control, programmed for your TV? Advanced Operations to
program the remote control to
send signals that your TV can
recognize.
Is remote control set to control Press the TV device button,
the TV? then press the button
corresponding to the TV
function you want.
Mechanical sounds during Has a loaded cassette been
stop mode. stopped more than 5 minutes?
Nothing is wrong. The tape
protection mechanism is
working. Eject the cassette if
you are done viewing.
Otherwise, no action is
necessary.
Cannot store tape date in Was 1 TAPE NAVIGATION Switch it to <ON>
Navigation Menu. <OFF> specified in the TAPE
NAVIGATION MENU?
Is the recording time too Data is not stored in memory
short? when the recording time is
less than 5 minutes (less than
5 minutes (less than 15
minutes in EP mode).
Is tape data memory full. Delete unnecessary tape data.
?5