Operation Manual

36
Recalling and clearing programmes from the VCR’s memory
Controls TV screen
Turn the VCR and TV on.
Be sure that the TV is set to the video programme
number.
1
2
3
4
Press the MENU button.
The OSD menu appears on the TV screen.
Press the button (REVIEW).
The TV screen will display the information you
entered for the lowest programme number.
Press again if you want to view the next
programme information immediately.
If no more programme information is stored, the
menu screen will be restored.
1
1
To clear a programme, press the button when
the programme information you want to clear is
displayed.
One event’s timer programme data is erased from
the VCR’s memory when the timer recording is
finished, but daily and weekly programmes
remain in the VCR’s memory even after the timer
recording is finished.
0
When you finish reviewing the programmes, press
the MENU button to switch off the on-screen
display.
M ODE C LOC K
4VCR5
REVI E
W CHANNE L
1 2 AUTO 3
M ENU
=
Exit
CH
M ENU
=
Exit
2
NO . 1
17/05/00
W
E
SP
1
19:30 20:00
=
0
=
NE
X T
0
5
Programme priority
Example 1: When the programme start time is the
same for more than one programme on the same
day, they are recorded in the following order of
programme 1, 2, 3 .... 8.
Example 2: When the programmes overlap, the
earlier programme has priority.
7:00 — 8:00 Programme 1
8:00 — 9:00 Programme 2
9:00 — 10:00 Programme 3
10:00 — 11:00 Programme 4
7:00 — 9:00 Programme 2
9:00 — 10:00 Programme 1
10:00 — 11:00 Programme 3
11:00 — Programme 4
Programme 1
Programme 2
Programme 3
Programme 4
Programme 1
Programme 2
Programme 3
Programme 4
7:00 8:00 9:00 10:00 11:00 7:00 8:00 9:00 10:00 11:00
1
4
2
56
3
7 8 9
0
0
1

MENU
(TIMER RECORDING)
The actual programme recorded and the sequence is as shown in the shaded part of the diagram.