Operation Manual

Item No. Function Page
1 Transmission window 9
2 OPERATE— switch between operate 29
and standby mode
3 TRACKING button 25
4 PROG (programme up /down ) button 12
5 These cursor buttons not used. —
6REW — rewind or search 23
7REC — record button 26
8MENU— to recall OSD menu 42
9 DISP — to recall on-screen display, 43
change VCR's display
10 VIDEO Plus+ — VIDEO Plus+ 30
programming
11 0000 — to correct an incorrect digit, 19
reset the time counter when it 39
appears in the VCR's display
12 SP/LP — changes tape speed during 20
record
13 F. ADV button — advance the picture by 22
one frame during still playback
14 These buttons not used. —
15 AUX button — select L1 or L2 input 45
16 Number buttons 19
17 STOP — stops play/record function 24
18 SLOW button— press during playback 22
19 F.FWD — fast forward or search 23
20 PAUSE — pause or still 22
21 PLAY — playback 22
22 TAPE FINDER button used for Index 40
Search, Easy View and Blank search
function
23 CH1/2 button — for audio channel 25
selection in playback
PDC button — for PDC setting during 55
recording
24 EJECT button — press to eject a cassette 20
25 VCR/TV select button 22
9
SETTING UP
1
4
2
56
3
7 8 9
0
2
3
4
5
6
7
8
9
10
13
21
20
11
14
17
1
25
24
16
18
19
15
22
23
12

Remote Control Handset Customer Controls
Power source of infrared remote control handset
Remote operations
The infrared remote control handset is powered by
two batteries (size IEC standard R6). The life of the
batteries is about a year although this depends on the
number of times the handset is used.
Replace the batteries when operation is not possible
or when the operating distance becomes too small.
Note: When replacing the batteries, remove the used
batteries and press the OPERATE button and hold it
pressed for 10 seconds, then insert the new batteries
and replace the battery cover.
To operate this VCR with the remote control handset,
point the remote control handset at the receiver on the
front of the VCR.

REMOTE OPERATION