- HITACHI Owner's manual Video Deck VT-FX6500A

MANUAL SET UP

CHANNEL 30 [TV]

ADD

- MEMORIZED -

6 Exit the preset mode

Press the RESET/EXIT button on the remote control to return to TV mode.

NOTE: To confirm that channel(s) has been deleted or added, press the CHANNEL(CH)

button.

CHANNEL SET UP AGAIN

Remember: If your cable box or satellite box is connected as in Fig 4 on page 11 or Fig 5 on page 12, you

DO NOT

have to set up the channels. Just select the TV and VCR to channel 3 or 4 and also have

theCH3/CH4 switch on the back of the VCR to match the channel you selected (CH 3 or CH 4). Now select

the Box to the channel you wish to view or record.

• Use the remote control for this procedure.

1) Press the MENU button until the main menu appears.

2) Press the PLAY/

or STOP/ button to point to "CHANNEL SET UP". Then, press the F.FWD/

button.

3) Confirm "AUTO SET UP" is pointed to, then press the F.FWD/

button. After scanning, the tuner stops

at the lowest memorized channel.

• The VCR distinguishes between standard TV channels and cable channels.

CHANNEL SET UP

→AUTO SET UP

MANUAL SET UP

SELECTING THE LANGUAGE

If you want to change the language on the TV screen, follow the steps below:

Note: This function effects only the language on the screen menu and not the audio source.

• Use the remote control for this procedure.

1) Press the MENU button until the main menu appears.

2) Press the PLAY/

or STOP/ button to point to "LANGUAGE SELECT". Then, press the

F.FWD/

button.

3) Select "ENGLISH" or "ESPANOL"= Spanish by using the PLAY/

or STOP/ button.

4) Press the RESET/EXIT button to return to TV mode.

NOTE: If for some reason the menu is in Spanish, press MENU button until the main menu appears, press

PLAY/

button to point to "SELEC.IDIOMA", press the F.FWD/ button, press the PLAY/ button

to point to "ENGLISH", then press the RESET/EXIT button.