Manual

This setup should be performed if you are using an Antenna or Cable without a cable box. (Hookups [A],
[B], [C] or [D].) If you receive all your channels through a cable box (Hookups [E], [F] or [G]) please refer
to page 25 "cable box setup" in "First Time Setup" section.
The following shows the procedure you should perform when you are receiving the Cable News Network (channel
42 with the VCR Plus+ system) on channel 38.
Matching Broadcast CH Numbers to VCR Plus+ Channels for Home Antenna or Cable (No Cable Box)
Setup (Hookups [A], [B], [C] or [D].)
1 Turn on the TV and select the Video channel (3 or 4).
Or, if you are hooked up with an audio/video cable, set the TV to AUX or VIDEO.
2 Press the GUIDE button.
The main on-screen menu will appear on the TV screen.
3 Press the (4) button to select CHANNEL PRESET.
CATV1 AUTO
CH SOURCE CHANNEL SET
CH LIST VCR PLUS+
ADD/ERASE SETUP
CABLE BOX
SETUP END _7 i
4 Press the (4) button to select VCR PLUS+ SETUP.
A small arrow points to a blank "--" in the CHANNEL column.
i
01
02 -- i
SCROLLI i 17 i _ i
END O_ i
Notei !f your broadcast channel number is the same as the VCR Plus+ channel inyour TV listing do not enter
any number.