Manual

When your VCR is connected to a stereo system, you can:
• Make high quality "audio only"recordings for up to 6 hours (on a T-120 video cassette tape).
• Receive quality stereo sound from your VCR through your stereo system.
• Use the VCR as an extra audio tape deck for dubbing.
BEFORE YOU BEGIN...
• Make sure the VCR is connected to your stereo system, as shown above.
• Make sure that "STEREO" audio is selected from the VCR Set-Up Menu, as shown on Page 42, of
"RECORDING OPERATION" Section, "Stereo vs. mono sound".
• Select VCR recording speed (SP or EP) as shown on page 39, of "RECORDING OPERATIONS" Section,
"Basic Recording Steps".
1 Press the AVX button on remote control, so that L1 (line) appears on the display.
LINE1
2 Turn on stereo, and start the selection you wish to record.
3 Press the REC button on the remote control or the REC/IRT button on the VCR to start recording.