Manual

No power
Remote control doesn't work
Won't record
Won't play back
Won't make timer recordings
Snowy picture in playback
Snow'/picture in normal TV viewing
Clock shows :
Erratic VCR display
• Make sure the VCR is plugged into an AC outlet.
• Make sure the batteries are fresh, and properly
installed.
• Safety tab has been removed from cassette (VCR will
automatically eject the tape).
• Make sure the TV!VCR switch is set to the VCR mode.
Make sure the TV is set to the VCR channel (3 or 4) or
AUX (if using direct audio/video hookup).
• The VCR power must be turned off to activate timer
recording.
Clock is not set correctly.
Programs entered incorrectly.
Programs exceed the length of the cassette. Use the
EP recording speed for maximum programming.
Safety tab has been removed from cassette.
• Snow or picture noise is normal during search, still,
and slow Playback.
Head cleaning may be required.
Tape is worn or of inferior quality - adjust tracking
controls.
• Check antenna or cable connections.
• Power has been interrupted - reset the clock.
Reset the clock.
• Push the reset switch (behind the cover on the VCR
front) with a sharp pointed instrument (pen, toothipick,
etc.).
=
Regular periodic maintenance is required to maintain optimum VCR performance. Such maintenance and
adjustments should not be attempted by the user. Please consult your service dealer for further information.
Auto Head Cleaning System
This system cleans the video heads automatically when a cassette is inserted and ejected or the VCR is turned
on or off while a cassette is in the VCR, to prevent dirt from accumulating on the heads.
Note! Mechan!cs! sound !s hear during head €!eaning!
NOTE: Dirt accumulation on the Video heads wi!l cause the playback picture to become n0isyl I
accumulations due to abnormal usage, or the use of poor quality tapes may be beyond the capabilities of