User Guide

9
ENGLISH
EXTERNAL CONNECTIONS (Continued)
CAMERA SW OUT
Pin o outputs the following signal each time a one-
field image is recorded. You can combine this with
a video camera switcher which can be controlled
externally.
The output timing can be specified using the SELEC-
TION MENU screen.
REC START IN
Recording is started when 5 ~ 12V is applied to pin
!0.
REMOTE IN
This VCR can be remote controlled when the follow-
ing circuit is connected to pin !3.
The above resistance values have a tolerance of
±2%.
REC CHECK IN
Recording can be checked when pin !4 is shorted to
pin !5 or !6 during recording mode. The recorded
material is played back for several seconds so that
you can check whether recording is made normally
or not.
5±2 ms
0~0.4V
4.5~5.5V
STOP
or
PLAY STILL REW F.ADV F.F RECMODE UP
5
1
6
1
3
1