Owner's Manual

OPERATING CONTROLS AND FUNCTIONS
11
OPERATING CONTROLS AND FUNCTIONS
NOTES:
• Some controls are located on both the VCR and on the remote control, some are only located on one, some controls operate
certain functions only in one location. See each description for details.
• We do not recommend the use f universal remote controls. Not all of the functions may be controlled with a universal
remote control.
If you decide to use a universal remote control with this unit, please be aware that the code number given may not operate
this unit. In this case, please call the manufacturer of the universal remote control.
click for image of the FRONT VIEW of VCR
click for image of –REMOTE CONTROL VIEW–
1. Cassette Compartment
2. STOP button- Press to stop the tape motion.
EJECT button- Press to remove a tape from the VCR.
button- Press to enter digits when setting program (for example: setting clock or timer program). Press to select setting
modes from on screen menu. (only on the remote control)
3. REW button- Press to rewind the tape, or to view the picture rapidly in reverse during the playback mode. (Rewind
Search)
button- Press to cancel a setting of timer program. Press to correct digits when setting program (For example: setting
clock or timer program). Press to add or delete channel numbers during channel preset. (only on the remote control)
4. PLAY button- Press to begin playback.
button- Press to enter digits when setting program (for example: setting clock or timer program). Press to select setting
modes from on screen menu. (only on the remote control)
5. F.FWD button- Press to rapidly advance the tape, or view the picture rapidly in forward during playback. (Forward
Search)
button- When setting program (for example: setting clock or timer program), press to determine your selection and
proceed to a next step you want to input. Press to determine setting modes from on screen menu. Press to add or delete
channel numbers during channel preset. (only on the remote control)
6. PAUSE button- Press to temporarily stop the tape during recording or to view a still picture during playback. (only on the
remote control)
7. POWER button- Press to turn VCR on and off. Press to activate timer recording.
8. VCR/TV button- Press to select TV or VCR mode. (only on the remote control)
VCR position: to view playback, to monitor video recordings or watch TV using the VCR tuner.
TV position: to watch TV or to view one program while recording another.
click for image of –REAR VIEW–
9. Remote sensor window- Receives the infrared signals from the remote control.
10. Digital display- See page 26.
11. SPEED button- Press to choose the desired recording speed: SP/LP/SLP. (only on the remote control)
12. CHANNEL (CH)
/ buttons- Press to select desired channels for viewing or recording.
TRACKING function- Press to minimize video 'noise' (lines or dots on screen) during playback. (only on the VCR)
Press to stabilize the picture in the Still mode when the picture begins to vibrate vertically.
13. REC button- Press to begin manual recording.
IRT button- Press to activate Instant Recording Timer. (only on the VCR)
14. NUMBER buttons- Press to select desired channels for viewing or recording. To select channels from 1 to 9, first press
"0" button then 1 to 9. (only on the remote control)
+ 100 button- When selecting cable channels which are higher 99, press this button first, then press the last two digits. (To
select channel 125, first press "+100" button then press "2" and "5"). (only on the remote control)
15. MENU button- Press to display the main menu on the TV screen. Press to exit the menus on the TV screen. (only on
the remote control)
16. DISPLAY button- Press to display the counter or the current channel number and current time on the TV screen. (only
on the remote control)