Owner's Manual

RECORDING

IRT (Instant Timer Recording)

This function enables you to set a recording length simply by pressing the REC/IRT button on the VCR.

• Please refer to the connection you are using, through pages 10, 11, or 12 on "ANTENNA/CABLE CONNECTIONS"

before continuing.

• It is not possible to perform this function with the remote control.

• The "PWR." and the "VCR" indicator must appear on the VCR's digital display.

• Turn on the TV and set the TV to channel 3 or 4. Now set the CH3/CH4 switch on the back of the VCR to match the

channel selected on the TV.

• Insert a cassette tape with its erase prevention tab in place. (If necessary, rewind or fast forward the tape to the point at

which you want to begin recording.)

PUSH(ES) DISPLAY RECORDED LENGTH

1 push (normal recording)

2 pushes 0:30 30 minutes

3 pushes 1:00 60 minutes

↓ ↓ ↓

17 pushes 8:00 480 minutes

18 pushes (normal recording)

NOTE: If you have a cable box or satellite box connected to this VCR, please refer to "ANTENNA/CABLE

CONNECTIONS" on pages 11 and 12 before proceeding to the next step.

1 Select the channel to be recorded

Press number buttons on the remote control or the CHANNEL or button.

2 Begin IRT

Press REC/IRT button on the VCR as many times as needed. The recording length will be determined by the number of times

you press REC/IRT button.

Each additional push will increase the recording time by 30 minutes. It is set up to 8 hours.

IRT (1:30)

• Recording starts immediately when the REC/IRT button is pressed, whether you are watching the same or a different

channel.

• When REC/IRT button is pressed 18 times, the VCR returns to the normal recording mode.

• To stop the IRT operation, press STOP button on the VCR or on the remote control.

• To show the remaining time, press DISPLAY button on the remote control so that "IRT" appears on the TV screen. (It will

show up momentarily then disappear.)

• Recording stops when 0:00 is reached.

• Please note that in the SLP mode maximum recording time, assuming the tape is started at the beginning, is 8 hours using

T-160 (or 6 hours using T-120).

• The TV that is connected to your VCR may be turned on or off during IRT.

• If the tape runs out before the end time, the VCR will switch to the Stop mode immediately, eject the tape and the VCR

power will be turned off.