Owner's Manual

VIDEO CASSETTE TAPE INFORMATION

This VCR will operate with any cassette that has the VHS mark. For best results, we recommend the use of high-quality

tapes. Do not use poor quality or damaged tapes.

PRECAUTIONS

• Avoid moisture. Moisture condensation may occur on the tape if it is moved from a cold place to a warm place. Before

using a tape with these conditions, to avoid damage of the tape and your VCR, wait until the tape has warmed to room

temperature and the moisture has evaporated.

• Avoid extreme heat, high humidity and magnetic fields.

• Do not tamper with the cassette mechanism.

• Do not touch the tape with your fingers.

THREE DIFFERENT TAPE SPEEDS

Before recording, select the tape speed from: SP mode (Standard Play), LP mode (Long Play) or SLP mode (Super Long

Play).

The table below shows the maximum recording/playback time using T60, T120, or T160 tapes in each mode.

Tape Speed Recording/Playback Time

Type of tape T60 T120 T160

SP mode 1 hour 2 hours 2-2/3 hours

LP mode 2 hours 4 hours 5-1/3 hours

SLP mode 3 hours 6 hours 8 hours

INSERTING A CASSETTE

Insert the cassette in the direction as shown. Push in gently, but continuously, on the center-back of the cassette until it is

drawn into the VCR.

The VCR will automatically turn on.

REMOVING A CASSETTE

1) In the Stop mode, press STOP/EJECT button on the VCR. The cassette will eject.

2) Pull the cassette out of the cassette compartment.

3) Store the cassette in the case as shown.

ERASE PREVENTION