Operation Manual

English
4
3. Plastic case
Optional accessories are subject to change without
notice.
APPLICATIONS
䡬 Tightening hex-head screws
䡬 Tightening drywall screws, wood screws and self-
drilling screws.
Magnetic bit holder
(Short type)
Magnetic bit holder
Non-magnetic bit bolder
STANDARD ACCESSORIES
(1) No. 2 Plus bit ....................................... 1 (W6V3, W6VA3)
(2) Magnetic hex socket (H= 10 mm) .... 1 (W6VB2, W8VB)
(3) Hook ..................................................................................... 1
Standard accessories are subject to change without notice.
Hex-socket Sub-Stopper (B)
Magnetic type
H = 6.35 mm
H = 7.94 mm
H = 9.53 mm
H = 10 mm
Non magnetic type
H = 6.35 mm
H = 7.94 mm
H = 9.53 mm
H = 10 mm
H 1/4
H 5/16
H 3/8
Bit type Sub-Stopper
2. For other screws
Bit holder
Screw
head
No.1
No.2
No.3
No.1
No.2
No.1
No.2
No.3
No.1
No.2
B Size
4 mm
5 mm
Sub-Stopper (A)
Sub-Stopper (C)
PRIOR TO OPERATION
1. Power source
Ensure that the power source to be utilized conforms
to the power requirements specified on the product
nameplate.
2. Power switch
Ensure that the power switch is in the OFF position.
If the plug is connected to a receptacle while the
power switch is in the ON position, the power tool
will start operating immediately, inviting serious
accident.
3. Extension cord
When the work area is removed from the power
source, use an extension cord of sufficient thickness
and rated capacity. The extension cord should be
kept as short as practicable.
OPTIONAL ACCESSORIES (sold separately)
1. For hex-head screws
4. Hook