User's Manual
43
Using the Preset for Washing
預校時間洗衣
Put the laundry in and press the "POWER
SWITCH" button .
放入衣物,按下電源開關按鈕 。
Press the "PROGRAM" button , select the
washing mode.
按下『程序』按鈕 ,選擇洗衣方式。
• With each pressing on the “PROGRAM” button, the
indicator will light or flash in sequence.
每按動一次『程序』按鈕,各指示燈會順次點亮或閃
動。
Press the "PRESET" button , set the
predefined time.
按下『預校』按鈕 ,設定預定時間。
• Set the time it will take to finish washing from now.
設定從現在開始多長時間後結束洗衣。
• Predefined time can be switched by pressing the
"PRESET" button.
按下『預校』按鈕,可切換預定時間。
Press "START" button .
按下『
動』按鈕
★ Put in the detergent according to the amount and
close the lid.
(The sound of buzzer indicates washing
completion)
根據顯示的水位,
放入洗衣粉,關閉機蓋
(蜂鳴聲響起表示洗衣完畢)
• The pulsator to detect the amount of laundry and
display on the control panel.
19
攪拌翼旋轉檢測出洗衣量並由控制面板顯示出來。
19
• If powder synthetic detergent is used, be sure to put
detergent into detergent dispenser.
使用粉末合成洗衣粉時,請將洗衣粉加入洗衣粉加入
盤。
• Do not use liquid detergent during preset washing.
預校洗衣時,請勿使用液體洗衣劑。
※Predefined operation can't be set in "SILK", "BLANKET", "BASKET CLEAN" and "AIR-JET" processes.
『絲絨』、『被毯』、『筒清洗』、『風乾』程序不能設定預校運轉。