Extra Information

ManualsBrandsHitachi ManualsScrewWH 14 DL

English

CAUTION ON LITHIUM-ION BATTERY

To extend the lifetime, the lithium-ion battery equips

with the protection function to stop the output.

In the cases of 1 and 2 described below, when using

this product, even if you are pulling the switch, the

motor may stop. This is not the trouble but the result

of protection function.

1. When the battery power remaining runs out (The

battery voltage drops to about 12V (WH18DL,

WR18DL) / about 8V (WH14DL, WR14DL)), the

motor stops.

In such case, charge it up immediately.

2. If the tool is overloaded, the motor may stop. In

this case, release the switch of tool and eliminate

causes of overloading. After that, you can use it

again.

SPECIFICATIONS

Cordless Impact Driver

Cordless Impact Wrench

Charger

Model UC14YFA UC24YFA UC18YG UC18YRL

Charging voltage 7.2 – 14.4 V 7.2 – 24 V 7.2 – 18 V 7.2 – 18 V

2.0 Ah : Ni-Cd 50 min. 50 min. 50 min. 30 min.

2.6 Ah : Ni-MH 65 min. 65 min. x 40 min.

Charging time 3.0 Ah : Ni-MH 70 min. 70 min. x 45 min.

3.3 Ah : Ni-MH 75 min. 75 min. x 50 min.

3.0 Ah : Li-ion x x x 45 min.

Weight 0.6 Kg 0.6 Kg 0.3 Kg 0.6 Kg

Charge time is approximate. Actual charge time may vary.

“x” Indicates that the battery pack is not compatible with that specific charger.

Model WH14DMR WH14DL WH18DMR WH18DL

Voltage 14.4V 18V

No-Load speed Power mode 0 – 2600 min

-1

Save mode 0 – 2000 min

-1

Capacity (Ordinary bolt) M6 – M14

Tightening torque Power mode 140 N·m 150 N·m

(Maximum)

Save mode 75 N·m 80 N·m

2.0 Ah

EB14B:Ni-Cd (12 cells)

EB1820L: Ni-Cd (15 cells)

2.6 Ah

EB1426H: Ni-MH (12 cells)

EB1826H: Ni-MH (15 cells)

Rechargeable battery

3.0 Ah

EB1430H: Ni-MH (12 cells)

BCL1430: Li-ion (4 or 8 cells)

EB1830H: Ni-MH (15 cells) EBM1830: Li-ion (10 cells)

EBL1430: Li-ion (4 cells)

EBM1430: Li-ion (8 cells)

3.3 Ah

EB1433X: Ni-MH (12 cells)

EB1833X: Ni-MH (15 cells)

Weight 1.8 Kg 1.5 Kg 2.0 Kg 1.6 Kg

Model WR14DMR WR14DL WR18DMR WR18DL