Operation Manual

10
English
SPECIFICATIONS
POWER TOOL
Model WH14DDL WH18DDL
Voltage 14.4 V 18 V
High mode 0 – 3000 min
–1
0 – 3100 min
–1
No-load Medium mode 0 – 2200 min
–1
0 – 2200 min
–1
speed
Low mode 0 – 900 min
–1
0 – 900 min
–1
S mode 0 – 3000 min
–1
0 – 3100 min
–1
Ordinary bolt M5 – M16
Capacity
High tension bolt M5 – M12
Machine screw M4 – M8
Self drilling screw ø 3.5 – ø 6
Tightening torque (Maximum) 167 N·m 172 N·m
Rechargeable battery
BSL1430: Li-ion BSL1440: Li-ion BSL1830: Li-ion BSL1840: Li-ion
14.4 V (3.0 Ah 8 cells) 14.4 V (4.0 Ah 8 cells) 18 V (3.0 Ah 10 cells) 18 V (4.0 Ah 10 cells)
Weight 1.3 kg 1.5 kg
STANDARD ACCESSORIES
In addition to the main unit (1), the package contains the
accessories listed in the table below.
Standard accessories are subject to change without
notice.
OPTIONAL ACCESSORIES
(Sold separately)
䡬 Battery
(BSL1430, BSL1440) (BSL1830, BSL1840)
Optional accessories are subject to change without notice.
CHARGER
Model UC18YRSL
Charging voltage 14.4 V – 18 V
Weight 0.6 kg
1 Charger ............................................. 1
2 Battery ............................................... 2
3 Plastic case ....................................... 1
4 Battery cover .................................... 1
WH14DDL
WH18DDL
APPLICATION
䡬 Driving and removing of machine screws, wood
screws, tapping screws, self drilling screws, etc
BATTERY REMOVAL/INSTALLATION
1. Battery removal
Hold the handle tightly and push the battery latch to
remove the battery (see Fig. 2).
CAUTION
Never short-circuit the battery.
2. Battery installation
Insert the battery while observing its polarities (see
Fig. 2).
CHARGING
Before using the power tool, charge the battery as follows.
1. Connect the charger’s power cord to a receptacle.
When the power cord is connected, the charger’s
pilot lamp will blink in red. (At 1-second intervals)
2. Insert the battery into the charger.
Firmly insert the battery into the charger until the line
is visible, as shown in Fig. 3, 4 .
3. Charging
When inserting a battery in the charger, charging will
commence and the pilot lamp will light continuously
in red.
When the battery becomes fully recharged, the pilot
lamp will blink in red. (At 1-second intervals) (See
Table 1)
(1) Pilot lamp indication
The indications of the pilot lamp will be as shown in
Table 1, according to the condition of the charger or
the rechargeable battery.
01Eng_WH14DDL_WE 12/13/12, 15:2710