Brochure

5
2
3
3
Watt-hour monitor
Output monitoring
(2 terminals)
Improvement
of environment
2
EU RoHS
compliant
Environment-friendly
inverter meets RoHS
requirements
(ordered items).
Energy consumption is displayed in kwh.
Two monitor output terminals (Analog 0 –10 VDC
(10-bit), pulse train (0–10VDC, max 32kHz) )
.
5
EzCOM (Peer-to-Peer communication)
WJ200 supports Peer-to-Peer communication between multiple
inverters. One administrator inverter is necessary in the network, and
the other inverters act as master or slave.
Varnish coating of
internal PC board is
standard.
(Logic PCB and I / F PCB are
excluded.)
Dual rating
1
WJ200 can be used for both heavy and
normal duty. One-frame-size smaller WJ200
can be applicable to certain applications.
*1-phase 100V class is only with CT.
Built-in BRD circuit
4
Built-in BRD circuit for all models (Optional resistor).
6
5
7
4
Network compatibility & External ports
Pursuit of Ease of Use
Environmental Friendliness
Easy to maintain
Easy selection of displayed parameters
●
Data comparison function
Display parameters changed from default setting.
●
Basic display
Display most frequently used parameters.
●
Quick display
Display 32 user-selected parameters.
●
User-changed parameter display
Store automatically and display the parameters changed by
the user (Up to 32 sets); can also be used as change history.
●
Active parameter display
Display those parameters which are enabled.
Inverters can be installed with no space
between them to save space in the panel.
*Ambient temperature 40
º
C max., individual mounting.
Side-by-side installation
6
Automatic return to the initial display: 10 min. after the last
key operation, display returns to the initial parameter set.
Display limitation: Show only the contents of display parameter.
Dual monitor: Two arbitrary monitor items can be set. Parameters
are switched by up/down keys.
Flexible display functions
Various Versatile Functions
Ease of wiring
Screw-less terminals (control circuit
terminals) spring-loaded, for use with
solid or stranded wire with ferrules.
Screw-less terminals
(Control circuit terminals)
A serial RS485 Modbus/RTU port is standard. The WJ200 can
communicate via DeviceNet and CCLink with optional expansion
card
(ordered items). USB (Mini-B connector) port and
RS422 (RJ45 connector) port are standard.
USB port
RS422 port
One network expansion card can
be installed inside the WJ200.
8
Pot for frequency adjustiment is
available as option kit.
Easy adjustment of frequency
Pot for
Frequency
Adjustment