User's Instructions

– 13 –
3. The Hitec cord is specifically marked at one end as the
master” the other end asstudent”. Plug it accordingly into
each transmitter, with power switched off. The trainer jack is
on the back of the transmitter. Turn the connector until its
notches line up and it fits without having to be forced.
4. Turn on the instructor’s transmitter. DO NOT turn on the
student transmitter power. Move the controls on the
instructor’s transmitter, and verify each control moves the
proper direction. Now verify that the student’s trims and
control travels match the instructor’s by using the trainer
switch (the momentary Trainer switch on the top left of the
transmitter case) and switching back and forth while leaving
the control sticks and trims alone, then moving the control
sticks.
5. The instructor’s transmitter has normal control over the model unless the trainer switch is
pulled, passing control to the student’s transmitter. If the student loses control, the instructor
can quickly "take over" by releasing the trainer switch and controlling the model.
Other Adjustments
Adjustable length control sticks
You may change the length of the control sticks to
make your transmitter more comfortable to hold and
operate. To lengthen or shorten your transmitter’s sticks,
first unlock the stick tip by holding locking piece B and
turning stick tip A counterclockwise. Next, move the
locking piece B up or down (to lengthen or shorten). When the length feels comfortable, lock the
position by turning locking piece B counterclockwise.
Stick lever tension adjustment
You may adjust the stick tension of your sticks to provide
thefeel” that you like for flying. To adjust your springs, you’ll
have to remove the rear case of the transmitter. Using a
screwdriver, remove the six screws that hold the transmitter’s rear
cover into position, and put them in a safe place. Place some
padding under the front of the transmitter and place it face-down on
the pad. Gently ease off the transmitter’s rear cover and move it to
include correct figure.
include correct figure.
include correct figure
identifying proper places