User's Instructions

– –

2. Press the

Up or Down

arrow key until you get into the Reset (REST) menu. This display has

the word “REST” flashing on and off. (If you’re already in the setup menus, you can just

press the

Down

arrow key to get here.)

REST

421 3 567

MODEL

3. IF YOU ARE SURE YOU WANT TO RESET and clear out the current model memory, press

both the +

Increase

and –

Decrease

Data

keys at the same time. The transmitter will beep

twice to indicate a successful reset

4. Press the

Down

arrow keys to get to another setup menu, or switch power off.

5. Switch power back on. You may now set up the details of your model in the Edit mode.

CAUTION: WHEN YOU COMMAND

RESET

, YOU’LL ERASE THE MEMORY

YOU’RE IN AND LOSE ANY PROGRAMMING YOU HAVE ENTERED. DON’T DO

THIS UNLESS YOU ARE POSITIVE YOU WANT TO FLUSH OUT THAT MEMORY

AND START FROM SCRATCH WITH THE FACTORY DEFAULT SETTINGS.

AIRCRAFT (

ACRO

) MENU FUNCTIONS

This section describes the menu functions for fixed-wing aircraft, provides a detailed

setup example, and then describes the functions individually. Functions relating

specifically to gliders and helicopters may be found in the following sections.