User's Manual

2. Receiver
Most Laser systems will be sold with the Hitec Supreme 8 channel dual conversion receiver,
these are the specifications of the Supreme receiver.
A. Features
• Dual conversion
• Narrow Band
• Crystal Interchangeable
B. Layout
(Show picture)
• Channel #1: (If vehicle does not have ailerons)
• Channel #2: Elevator
• Channel #3: Throttle or Electronic speed controller
• Channel #4: Rudder (If vehicle has ailerons)
• Channel #5: Gear (Laser 6 only)
• Channel #6: Flaps (Laser 6 only)
• Channel #7: Not used
• Channel #8/Batt: Battery or switch harness
C. Specifications
• Power supply: 4.8 – 6 volts
• Current drain: 22mA
• Dimensions: 2.3”x 1.4”x 0.8”
• Weight: 1.34 oz (34 grams)
• Range: Line of sight to 3,500 ft.
• Operating voltage: 3.7 – 7.0 volts
D. Installation
• Always wrap receiver in the supplied protective foam padding.
• Do not coil the antenna.
• When turning on the system always turn the transmitter on first and off last.
• See vehicle manufacturers instructions for proper radio system location.