Manual

9 CHANNEL 2.4GHz AIRCRAFT COMPUTER RADIO SYSTEM
Transmitter Battery Information
Your Aurora 9X transmitter is supplied with a rechargeable, 6 cell, AA size,
Nickel Metal Hydride (NiMH) battery pack with a nominal voltage of 7.2V.
Charging Method (CG-SXX series charger)
The preferred charging method is to use the supplied CG-SXX overnight wall charger. Plug it into the port as shown in the diagram. Note
the red “charging in process light” on the CG-SXX overnight wall charger. This light will turn green when charging is complete. The battery
can be removed from the radio and charged with a “quick” charger. The recommended charge rate should be no more than 2 Amps.
Do not install a Li-Po in the Aurora 9X and then try and charge it with the supplied CG-XX overnight wall charger.
The CG-XX was designed to be used for NiMH cells only! Certain Major damage is sure to occur.
Caution
Cti
Cti
Cti
Cti
Cti
Cti
Cti
Cti
Cti
Cti
ti
ti
ti
ti
ti
ti
ti
i
i
i
i
i
i
i
i
i
i
i
i
i
i
i
i
Power Meter
There are two ways to review the battery voltage on the Aurora 9X home screen. A “direct voltage read out”, and a “percentage of
available power” graph can be displayed by touching the power icon on the main menu.
The Li-Po Option
The user has the option to power the Aurora 9X with a 2S Li-Po 7.4 voltage battery, but accepts full responsibility to do so safely. Also you
must change the “battery type” on the menu properly.
* Warning: During the Aurora 9X's charging process, turn o the transmitter power
13