INTEGRATED POWER SYSTEM
operation manual
Introduction:
Thank you for purchasing Hitec’s Energy Propel integrated Power System. Featuring a high
performance, high eciency brushless motor integrated with our Energy Rotor electronic speed
control! This combination creates an easy straighforward installation and clean wiring layout for
your multi-rotor
Connecting Your Motor:
1. Connect the power wires from the Motor to the power distribution board or battery.
2. Connect the signal cable to the ight controller according to the instruction.
Note: The red wire from the Motor should connect to the Positive + and black to the Negative (-)
side of the Power Distribution Board.
Power
Distribution
Board
-
+
Red
Black
Battery
-
+
-
+
Signal Wire
(white & black)
Power Wires
Energy Propel
Motor
180X & 22XX
Series
 
 

Summary of content (2 pages)

Don't see a manual you are looking for?