RDX2 Pro Manual

13
Battery Type Operation Operation Description
NiMH
NiCd
CHARGE
The charger will charge NiMH and NiCd batteries using
the charge current set by the user.
AUTO CHG
In this program, the charger detects the condition of the
connected battery and automatically charges the battery.
Note: You should set the upper limit of the charge current
to avoid damage by excessive charging current. The RDX2
Pro may not be able to detect the charge capacity of low
resistance batteries.
DISCHARGE This mode is for discharging a NiMH/NiCd battery
RE-PEAK
In re-peak charge mode, the charger can peak charge the
battery once, twice, or three times in a row automatically.
This is good for con rming the battery is fully charged and
for checking how well the battery receives fast charges.
CYCLE
Automatically charges/discharges the battery up to 5
times. This process can restore the performance of NiMH/
NiCd batteries.
Lead
Acid
Pb
CHARGE This mode is for charging a Pb battery.
AGM CHARGE
This mode is for charging an Absorbent Glass Mat (AGM)
battery.
COLD CHARGE
This mode is for charging a Pb battery at low
temperatures(<-32
o
F/0
o
C).
DISCHARGE This mode is for discharging a Pb battery.
Available Operations (continued)
Getting Started