RDX2 Pro Manual

23
A
A
A
Pb COLD CHG
Pb COLD CHG
P-6 1.5A 12.56V
1.5A 12.0V (6P)
1.5A 12.0V (6P)
CHG 055:10 01464
Pb Lead-Acid Battery Program
Pb COLD MODE: Press the ENTER button and the amp value
will begin  ashing. Turn the dial to the desired charge rate.
Press the ENTER button again and the nominal battery pack
voltage will begin  ashing. Turn the dial to set the voltage
and the number of cells.
Press and hold the Jog Dial ENTER for 3 seconds to start
charging.
Once charging has commenced, the charger will display the
following real-time information: battery type, cell count,
charging current, battery voltage, elapsed time and charged
capacity.
When charging is complete, the screen will read “END: FINISH”
and the charger will emit an audible “ring” sound.
Input voltage
Safety timer setting
Internal temperature
During the Pb battery charging/discharging process, the RDX2 Pro can display a variety of
information. Turn the Jog Dial and you can also view the following information:
Additional Pb Process Information:
A
A
A
A
CAPACITY CUT-OFF
IN POWER VOLTAGE
SAFETY TIMER
INT. TEMP 94
0
F
ON 15000mAh
15.8V
ON 300MIN
Capacity cuto setting
1.5A 12.0V (6P)
1.5A 12.0V (6P)
Pb COLD CHG
Pb COLD CHG
Pb COLD CHG
Pb COLD CHG
Pb COLD CHG
1.5A 12.0V (6P)
1.5A 12.0V (6P)
1.5A 12.0V (6P)
Pb COLD CHG
Pb COLD CHG
Pb COLD CHG
Pb COLD CHG
Pb COLD CHG
Pb COLD CHG
Pb COLD CHG
Pb COLD CHG
Pb COLD CHG
Pb COLD CHGPb COLD CHG
Pb COLD CHG
Pb COLD CHG
Pb COLD CHG
1.5A 12.0V (6P)
Pb COLD CHG
1.5A 12.0V (6P)
A
BATTERY CHECK
.............
A
[END: FINISH]
13.56V 14260mAh
A
[TIME:04:45:32]
13.56V 14260mAh
*FLASHING