RDX2 Pro Manual

ManualsBrandsHitec ManualsBattery ChargersRDX2 Pro High-Power, 260W, Dual Port AC/DC Charger

Battery Memory Set and Call Out

[BATT MEMORY 1]

CHARGE CURRENT

BATT TYPE

DISCHARE CURRENT

DISCHG VOLTAGE

BATT VOLTAGE

TRICKLE

PEAK DELAY

SAVE PROGRAM

[BATT MEMORY 1]

ENTER SET ->

5.0A

NiMH

2.0A

1.0V/CELL

7.2V (6S)

100MA

1MIN

ENTER

SAVE....

NiMH 7.2V (6S)

C:2.0A D:1.0A

NiMH/NiCd: Press the MODE/STOP button to exit any

charging programs you are currently in and then SCROLL to the

BATT MEMORY program.

Press the Jog Dial ENTER to enter the program. SCROLL to

select the memory #. Once set, the battery type and voltage

will be displayed. If not set, it will read ENTER SET.

Press the Jog Dial ENTER to set up a new memory. BATT

TYPE will be displayed, press ENTER to make it blink and

then SCROLL to select the battery you want to charge. Once

selected, press ENTER to store.

SCROLL to the right for BATT VOLTAGE, press ENTER to make

it blink and SCROLL to adjust. Once selected, press ENTER to

store.

SCROLL to the right for CHARGE CURRENT, press ENTER to make

it blink and SCROLL to adjust. Once selected, press ENTER to

store.

SCROLL to the right for TRICKLE, press ENTER to make it blink

and SCROLL to adjust. Once selected, press ENTER to store.

SCROLL to the right for PEAK DELAY, press ENTER to make it

blink and SCROLL to adjust. Once selected, press ENTER to

store.

SCROLL to the right for DISCHG CURRENT, press ENTER to make

it blink and SCROLL to adjust. Once selected, press ENTER to

store.

SCROLL to the right for DISCHG VOLTAGE, press ENTER to make

it blink and SCROLL to adjust. Once selected, press ENTER to

store.

Finally, SCROLL to the right for SAVE PROGRAM, press ENTER to

store this memory.

7.2V (6S)

BATT VOLTAGE

BATT VOLTAGEBATT VOLTAGE

BATT VOLTAGE

CHARGE CURRENT

CHARGE CURRENTCHARGE CURRENT

CHARGE CURRENT

100MA

1MIN

DISCHARE CURRENT

1.0V/CELL

DISCHG VOLTAGE

DISCHG VOLTAGEDISCHG VOLTAGE

DISCHG VOLTAGE

*FLASHING