RDX2 Pro Manual

31
The user can check each cell’s resistance as well as the battery’s total resistance. Connect the battery
via the charger’s main battery lead to the battery socket; and the balance wires to the balance socket
as shown below.
Press ENTER to start the Lithium
Battery Resistance program.
This screen indicates each cell’s resistance.
PRESS ENTER for the total resistance.
Battery Resistance Meter
A
4.7 5.9 4.7mΩ
0.0 0.0 0.0mΩ
A
MAIN: 15.3mΩ
A
BATT/PROGRAM
BATT RESISTANCE
This photo shows the correct
way to connect your battery to
check the resistance.
A
BATTERY CHECK
.............