DPC-11 PC Servo Progammer Manual
18
DPC-11
Universal Programming Interface
for Hitec Programmable Servos
DXXX Series Programming cont.
9. Smart Sense On/O
Smart Sense is a feature unique to Hitec’s D Series
servos. This feature allows the servo to analyze
operational feed back and automatically make
on the y parameter adjustments to optimize
performance.
10. Sensitivity Ratio Settings
Another feature unique to Hitec’s D Series servos
is the ability to adjust the sensitivity of the servos.
Servo sensitivity is best described as how a servo
responds to input both from the transmitter as
well as how it responds to external loads. To much
sensitivity may cause a servo to jitter while in the idle
position where as less sensitivity may make the user
feel that the servo has a slower reaction time. Using
the sensitivity adjustment, along with the Dead Band
setting, allows the user to adjust the servo to their
specic needs and operating style.
To adjust the sensitivity ratio use the slider to adjust
it up or down. When you have reached the desired
setting click on the apply button.
In addition to the manual adjustment method there
are seven preset sensitivity settings for 3D Aircraft,
Sailplanes, Helicopters, O and On Road vehicles,
Power Boats and Sail Boats