DPC-11 PC Servo Progammer Manual

19
DPC-11
Universal Programming Interface
for Hitec Programmable Servos
To load a parameter le, click on
“OPEN,” navigate to the location
where you have stored your
le, and click on the le name
to open. You will get the “Open
completed” conrmation that
the le has loaded.
2. Load a File
To restore the servo to its factory default settings,
click on the “Program Reset” button.
3. Restoring Factory Defaults
With the DPC-11 software, you have the ability to
save and load servo parameter les. This is helpful
when needing to setup multiple servos with the
same parameters. The DPC-11 software also has
the ability to restore the factory defaults le in the
event the user setup doesn’t operate correctly. The
following details how to use these features.
Loading and Saving Files, Restoring
Factory Defaults
Once you have completed your servo setup and
written the setup to the servo, click on “SAVE”
to open the save le dialog box. Navigate to the
location that you want to save your le to, enter
a name for your servo and click save. You have
successfully saved your servo parameters to a le.
1. Save a File
DXXX Series Programming cont.