DPC-11 PC Servo Progammer Manual

27
DPC-11
Universal Programming Interface
for Hitec Programmable Servos
Loading and Saving Files, Restoring
Factory Defaults
With the DPC-11 software you have the ability to
save and load servo parameter les. This is helpful
when needing to setup multiple servos with the
same parameters. The DPC-11 software also has
the ability to restore the factory defaults le in the
event the user setup doesn’t operate correctly. The
following explains how to use these features.
1. Save a File
Once you have completed your servo setup and
written the setup to the servo, click on “Read Servo”.
Next click on “SAVE” to open the save le dialog box.
Navigate to the location that you want to save your
le to, enter a name for your servo and click “Save”.
You have successfully saved your servo parameters
to a le.
HSB-9XXX Servo Programming cont.