DPC-11 PC Servo Progammer Manual

DPC-11

Universal Programming Interface

for Hitec Programmable Servos

With the DPC-11 software you have the ability to

save and load servo parameter les. This is helpful

when needing to setup multiple servos with the

same parameters. The DPC-11 software also has

the ability to restore the factory defaults le in the

event the user setup doesn’t operate correctly. The

following details how to use these features.

Loading and Saving Files, Restoring

Factory Defaults

Once you have completed your servo setup and

written the setup to the servo click on “SAVE” to open

the save le dialog box. Navigate to the location

where you want to save your le. Enter a name for

your servo and click “Save.” You have successfully

saved your servo parameters to a le.

1. Save a File

Once you have your desired Fail Safe position set,

click on the “Fail Safe On” button to activate it. You

can check the position using the fail safe position test.

9. Fail Safe On/O

HS-7XXX/5XXX Series Programming cont.