Operation Manual


Reading the LED Battery IndicatorsReading the LED Battery Indicators
Reading the LED Battery IndicatorsReading the LED Battery Indicators
Reading the LED Battery Indicators
Full Power:
GrGr
GrGr
Gr
eeneen
eeneen
een
Normal:
AmberAmber
AmberAmber
Amber
Warning:
Flashing RedFlashing Red
Flashing RedFlashing Red
Flashing Red
Illustration:
3
FEAFEA
FEAFEA
FEA
TURESTURES
TURESTURES
TURES
AND SPECSAND SPECS
AND SPECSAND SPECS
AND SPECS
Pistol Grip 2 Channel FM Proportional System
Servo Reversing Switches (Both Channels)
Steering Rate Adjustment. Thumb Controlled (40% - 100%)
Adjustable Steering Rate Override button (40% - 100%)
End Point adjustment (E.P.A.) Throttle and Brake
3 LED Battery Status Indicators
Power Output: 500mW
Current Drain: 180mA
SETTINGSSETTINGS
SETTINGSSETTINGS
SETTINGS
AND OPERAAND OPERA
AND OPERAAND OPERA
AND OPERA
TIONTION
TIONTION
TION
1. TRANSMITTER
■
Loading batteries:Loading batteries:
Loading batteries:Loading batteries:
Loading batteries:
You may us either NiCad batteries or Alkaline “AA” size batteries (NiCad recommended)
✷ Push the bottom battery cover in the direction of the arrow then lift up the cover.
✷ Load 8 “AA” batteries (be sure the polarity is correct).
✷ Reinstall battery case with installed “AA” batteries with connections to the top left.
✷ NiCads should be charge before use.
With new alkaline or freshly charged NiCads the
GrGr
GrGr
Gr
eeneen
eeneen
een
light should be lit. With use the
GrGr
GrGr
Gr
eeneen
eeneen
een
light will turn to
AmberAmber
AmberAmber
Amber
. If the
RedRed
RedRed
Red
light begins to flash, operation should be stopped and the
batteries should be recharged or replaced immediately.
■ Optional NiCad Battery Installation (part # 58207).
1. Plug the white battery plug into the receptacle in the bottom of the pistol grip handle.
(Refer to Illustration)
2. Push the pack up into the battery bay.
3. Replace the cover.
4. Check the power level.
5. Charge if needed. (Refer to illustration below)