Data Sheet

2322
Item Selection Description
89-109 Choose the LCD denition best
suited to your preference
Display the hardware and
rmware version.
SYSTEM SETUP
SYSTEM SETUP
LCD Contrast:
LCD Contrast:
Factory Reset 100
Factory Reset
FW Version: 1.01
FW Version: 1.01
HW Version: 1.00
HW Version: 1.00
100
100
Press the Start/Enter button to
make “Reset” blink; then, press and
hold the Start/Enter button to load
the factory default settings.
SYSTEM SETUP
Key Beep:
Buzzer: ON
LCD Contrast: 100
Factory Reset
ON
BATTERY PAC K
BATTERY METER
Main: 25.1V
4.18 4.19 4.19V
4.18 4.19 4.19V
H: 4.187 L: 4.176V
This diagram shows the
correct way to connect your
battery to check the voltage.
Battery Meter
The user can check the battery’s total voltage, the highest voltage, the
lowest voltage and each cell’s voltage. Connect the battery via the charger’s
main battery lead to battery socket and balance wires to the balance socket
as shown below.
The display indicates the current Main Voltage, Percentage of Charge,
Individual Cell Voltage, and the Highest and Lowest voltages of the packs
cells.
SYSTEM SETUP
Key Beep:
Buzzer: ON
LCD Contrast: 100
Factory Reset
ON