User's Manual

6
Can I install and run ClassComm from a Server across a
network?
Currently,ClassCommisadesktopapplicationdesignedtobeinstalledandrunfromaTeacher/
presenterPC.Itcannotberuncentrallyfromaserver.AnMSIversionofClassCommisavailable
foreasydeploymentacrossanetwork.Pleasecontact[e-mail]forfurther
details.
7
The handsets are not talking to the receiver. What do I do?
• EnsurethatthereceiverisconnectedviaUSBcabletoanavailableUSBportandhasared
LEDshowing.
• OpentheClassCommsoftwareandensurethatitstates“5greceiverconnected”inthe
bottom-leftoftheapplication
• Ensurethatthehandsetshavethebatteriesinsertedthecorrectway-
• PressinganykeyshouldshowagreencommunicationLED.Ifitisredthenre-maptothe
receiverbypressingandholdingthe-/?Keyuntilitblinksgreen.
• Resetthehandsetfromtheresetswitchonthebackandre-maptothereceiver.
Pleasecontact[e-mail]iftheproblempersists.
FAQ
Support
Free technical helpline
Tel:01902390878EXT5
Email:[e-mail]
Website: www.geneeworld.com
3yearsRTBwarranty