使用说明书（印刷时请删除此页） 尺寸 85×85mm-公差±2mm 材质 封面两页 157g 铜版纸，内页 80g 双胶纸 工艺 单黑双面印刷，封面覆哑膜 成型方式 钉装 履历页 版本 页次 更新内容 更新时间 V1.0 所有 在“(海外中性)BM11- 2021-02-01 Speakerphone User ManualV1.
V1.1 8,10 添加 FCC 认证信息（认证提供） 2021-02-02 V1.
Speakerphone | User Manual All the pictures in this manual are for reference only, please refer to the actual product.
Contents 1. Important Information ....................... 1 2. Safety Warnings and Precautions ............. 2 3. FCC Statement............................... 8 4. FCC Warning ............................... 11 5. Special statement .......................... 12 6. Product Appearance ......................... 15 7. Product Usage.............................. 17 8. Common faults and troubleshooting .......... 29 9. Key Specifications .........................
1. Important Information This manual Contains the precautions and the product usage. Please read and understand all the instructions before using the device. The damage caused by failure to follow the instructions is not covered by the warranty. Please keep this manual properly.
2. Safety Warnings and Precautions 2.1. Be careful of electric shock or fire! 2.1.1. This device is not waterproof, please keep it dry; if water is immersed in this product, please shut down immediately and contact the customer service centre according to the prompt provided by the customer service centre before using it again. 2.1.2.
other heat sources, Including direct sunlight. 2.1.3. This device should be turned off and unplugged before lightning storms. 2.2. Be careful of short circuit or catching fire! 2.2.1. Before connecting this device to an electrical outlet, please make sure that the power supply voltage matches the voltage value printed on the back or bottom of the product.
to an electrical outlet when the voltage is different. 2.3. Be careful of injury or harm this speaker! 2.3.1. Never place this device or any objects on a power cord or other electronic devices. 2.3.2.
it to a power outlet. 2.3.3. This product comes with sharp objects, please handle it carefully so as to avoid injury to the user or scratching the appearance of the product or damaging the internal parts of the product! 2.4. Be careful overheat! 2.4.1. Never install this device in an enclosed space. Always leave at least 4 inches space around the product for ventilation.
2.5. Children's health 2.5.1. This device and accessories may contain some small parts, please keep them out of the reach of children to avoid danger. 2.6. Care for the environment! 2.6.1. This device applies recyclable high- performance materials and components. 2.6.2. Never dispose of this product with other household wastes.
collection of electronic, electrical products and batteries. 2.6.3. Proper disposal of these products helps to avoid potential negative effects on the environment and human body health. 2.7. Care for the product! 2.7.1. Clean this device only with a piece of microfiber cleaning cloth. 2.8. Maintenance & servicing 2.8.1.
2.8.2. Please do not insert any sharp object into the inside of the device; 2.8.3. Please do not drop or hit the device to avoid damaging it. 3. FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
technician for help. Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. 4. FCC Warning This device complies with Part 15 of the FCC Rules.
harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Radiation Exposure Statement: The device has been evaluated to meet general RF exposure requirement, The device can be used in portable exposure condition without restriction. 5. Special statement 5.1.
hardware design and software programs of this product are copyright protected. Anyone copying the contents of this product and instructions without the authorization of this company will bear the corresponding legal responsibilities. 5.2. This manual is for reference only. The actual final functions are subject to the actual ordering of the customer and the actual functions of the product received. 5.3.
refer to the actual product. The company reserves the right to make improvements on and changes to the product appearance and design without prior notice. Bluetooth words and trademarks are owned by Bluetooth SIG, Inc.
6.
a. USB Type-C port b. 4-section 3.5 mm audio input/output hole c. Volume down Button d. Bluetooth Button e. Microphone mute Button f. Answer/hang up Button g. Volume up Button h. Indicator Light i.
7. Product Usage 7.1. Turn on/off the device Long press and hold the power key for 2 seconds to turn on or off the device. 7.2. Bluetooth 7.2.1. When Bluetooth is not connected, long press to turn Bluetooth on/off; 7.2.2. When Bluetooth is connected, long press to disconnect the current Bluetooth connection.
7.3. Four types of connection modes 7.3.1. Mode 1: Connect the computer/conference plat (Windows or Mac) to this device via USB cable. 7.3.2. Mode 2: Connect this device with the original AUX audio cable (4 sections). 7.3.3. Mode 3: Connect this device with Bluetooth.
Bluetooth pairing state. Enable Bluetooth functions on mobile phones/other devices, and select to connect this device from the Bluetooth device list. Please refer to the nameplate at the bottom of the device for the name of bluetooth (when the conference panel is connected to the wireless omnidirectional mic speaker, USB bluetooth adapter is required to ensure the stability of bluetooth connection) 7.3.4.
(supporting win7/8/10 and Mac OS)， operating as follows: ① Insert the USB Bluetooth audio adapter into the comp uter, and turn on the device to enter the Bluetooth pairing status (If you use a USB Bluetooth adapter to connect to the conference plat, please connect it to the frontmounted USB port of the conference plat to ensure best use effect); ② USB Bluetooth audio adapter will be 2
automatically connected to the device(which is the only device bound by USB Bluetooth audio adapter); ③ If it is necessary to re-pair the USB Bluetooth audio adapter to the new wireless omni-directional speaker, the distance between the USB Bluetooth audio adapter and the wireless omnidirectional speaker should be controlled within 3 meters.
wireless omni-directional speaker, long press and hold the Bluetooth key for 9 seconds to enter the binding mode. After plugging the USB Bluetooth audio adapter, the USB Bluetooth audio adapter will be rebound successfully within 30 seconds.
sound setting interface. 7.4. Multi-party conference It supports multi-channel data fusion of USB, Bluetooth and audio ports. It can work in three connection modes at the same time so as to support simultaneous access of multiple parties for the conference. 7.5.
connecting to the phone. 7.5.1. When there is an incoming call, press the“ ”key to answer the call. 7.5.2. When it is in calling state, press the“ ”key to hang up the call. 7.5.3. When there is an incoming call, long press and hold the“ ”key for 3 seconds to reject the call. 7.6.
short press the microphone mute key to turn the microphone on or off. 7.7. Volume adjustment Press volume "+" and volume "-" keys to increase or decrease the volume accordingly. 7.8.
flashing connection bluetooth button 3s to enter S4; Long press the bluetooth button 9s to enter S3 S2 Blue Bluetooth Long press light is connected the 2
always bluetooth on button 3s to enter S1 S3 S4 White Repair Long press lights status with the flashing USB bluetooth bluetooth button 3s adapter to enter S1 White Bluetooth Long press light is function the always turned off bluetooth 2
on button 3s to enter S1 7.9. Charging the Device 7.9.1. Connect the original power adapter(5V/2A) with USB cable for charging. 7.9.2. When charging, the white indicator of the power key will flash; when fully charged, the green indicator of the power key will be normally on. 7.10.
to view the current remaining electric quantity. When the light bar displays 5 squares, the battery is full. When the electric quantity is relatively low, the power key’s red indicator light will flash and the low electric quantity prompt tone is broadcast. 8. Common faults and troubleshooting The following table contains common faults and their solutions. Please read it carefully.
Unable to Low or no Connect the turn on the electricity adapter to device charge Shut down Insufficient Connect the automaticall electric adapter to y after quantity charge running for a while 3
No sound Is the Select the connection correct sound correct? Is the source input; volume turned adjust the on? device Unable to Is there any Please use the work with mistake in original USB USB using the USB cable to make a cable? call.
Unable to Is there any Please use the work with mistake in original AUX AUX using the AUX cable (4 cable? sections) to make a call. Invalid key The key may Long press be accidentally and hold the touched. power button for 8seconds to reset the system.
Unable to The charging Replace it with charge the device is in a charging device fault or the device with battery is normal already full. functions 9.
are not included nd in the standard accessory set a contact your l are required to buy separately. access official Please ocal dealer or you have such demand.
