User Manual

14/31
V1.0
Fig 3 Cable Modem Setup using USB port
Install the cable modem according to the following procedure:
1 Power off the computer (and television, if you plan to have the cable modem and
television connected to the same wall cable outlet).
2 Unplug the power cord of computer (and television).
3 Connect the coaxial cable to the cable modem’s cable television (CATV) cable
connector.
4 Connect all of the devices:
a. If you plan to have the cable modem and a television connected to the same wall
outlet, you must use a cable line splitter (not included).
b. Plug the cable modem’s power adapter into the cable modem’s power jack and into
a grounded electrical outlet or surge protector that is plugged into a grounded
electrical outlet.
CAUTION! You must use the 5VDC power adapter that comes with
the Hitron BRG-35302 cable modem. Using the wrong
power adapter can damage the cable modem.
c. Connect the USB end of the cable modem to the USB port on your computer using a
USB cable.
5 Plug the power cord of computer (and television.)
6 Power on the computer (and television.)
7 Now your connection should be similar to the Fig. 3.