User Manual

17/31
V1.0
Chapter 4
Wireless Configuration（BWA35302）
! CAUTION! Be sure to read this entire User’s Manual from front to back in
sequence before installing the Hitron™ “Broadband
Residential Cable Modem Gateway” BRG-35302 / BWA35302.
This chapter provides an overview of how to set up the Wireless parameters via Ethernet Port
Interface. First you can refer to chapter 2
: “Installing the Cable Modem Using the Ethernet
Port
” and verify that the Ethernet Port is operating properly.
After making sure the Ethernet Port works fine, please connect the Cable Modem and your
computer via the Ethernet Cable (Included in the accessories.).
Fig. 4 Cable Modem Connection Using Wireless
The Factory Default IP address of the Ethernet Port is 192.168.100.1, and the DHCP server is
enabled. You can configure your computer as “Automatic Get the IP”, or set the IP as