User's Manual

STATUS

HITRON CGN USER’S GUIDE

The following table describes the labels in this screen.

Table 8: The Status > System Info Screen

Device Information

System Time This displays the current date and time.

System Uptime This displays the number of days, hours, minutes and

seconds since the CGN was last switched on or rebooted.

Model Name This displays the device’s model name.

SW Version This displays the version number of the software that

controls the CGN.

HW Version This displays the version number of the CGN’s physical

hardware.

RF MAC This displays the Media Access Control (MAC) address of

the CGN’s RF module. This is the module that connects to

the Internet through the CATV connection.

Serial Number This displays a number that uniquely identifies the device.

RG Status This displays whether or not the CGN is in Residential

Gateway (RG) mode.

When the CGN is in Residential Gateway mode, ON

displays. When the CGN is not in Residential Gateway

mode, OFF displays.

Wifi Status This displays whether or not the CGN’s wireless network

is active.

When the CGN’s wireless network is active, ON displays.

When the CGN’s wireless network is not active, OFF

displays.

NAT Status This displays whether or not the CGN’s Network Address

Translation (NAT) feature is active.

When NAT is active, ON displays. When NAT is not active,

OFF displays.

DHCP Status This displays whether or not the CGN’s DHCP server is

active.

When the DHCP server is active, ON displays. When the

DHCP server is not active, OFF displays.

Firewall Status This displays whether or not the CGN’s firewall is active.

When the firewall is active, ON displays. When the firewall

is not active, OFF displays.