User's Manual

STATUS

HITRON CGN USER’S GUIDE

WAN Information

WAN Address This field displays the CGN’s IP address on the WAN

(Wide Area Network) interface.

Subnet Mask This field displays the CGN’s WAN subnet mask.

Gateway Address This field displays the address of the device on the WAN

to which the CGN is connected.

DNS Server This field displays the Domain Name Servers that the

CGN uses to resolve domain names into IP addresses.

Uptime This displays the number of hours, minutes and seconds

that the CGN has been connected to another device over

the WAN interface.

Traffic Count This displays the number of bytes received and sent on

the WAN interface.

Wireless Information

SSID This displays the wireless network’s Service Set Identifier.

This is the name of the wireless network, to which wireless

clients connect.

Wireless Mode This displays the type of wireless network that the CGN is

using.

Channel This displays the wireless channel on which the CGN is

transmitting and receiving.

Security Type This displays the type of security the CGN’s wireless

network is currently using.

Cipher type This displays the type of encryption that the wireless

network’s security is using:



TKIP displays if it is using the Temporal Key Integrity

Protocol.



AES displays if it is using the Advanced Encryption

Standard.



TKIP and AES displays if it allows clients using either

encryption type to connect to the CGN.

SSID MAC This displays the Media Access Control (MAC) address of

the wireless module, to which wireless clients connect.

LAN Status

MAC Address This displays the Media Access Control (MAC) address of

the CGN’s Ethernet module. This is the module to which

you connect through the LAN ports.

Table 8: The Status > System Info Screen (continued)