User's Manual

ManualsBrandsHitron TECHNOLOGIES ManualsComputers & AccessoriesWireless Cable Gateway

Table Of Contents

Read me

first!

QUICK START GUIDE

HITRON

Connect to the network

CGNM-3552-ROG

Set up your wireless network

STEP

Check the box contents

1 CGNM-3552-ROG

QUICK START GUIDE

1 POWER ADAPTOR

STEP

Connect to the cable outlet

Use the coaxial (not included) to connect the device’s CABLE

connector to the cable outlet.

STEP

Connect to the power outlet

Use the power cord provided to connect the POWER port to power

outlet.

STEP

Connect with wireless devices (optional)

STEP

Connect to an Ethernet-equipped device (optional)

Use the Ethernet cable provided to connect one of the LAN ports

to an Ethernet-equipped device.

You can connect your wireless devices with the correct SSID

and Passphrase. If you have not changed them, the default

values are indicated on the sticker on the rear of the unit.

Connect options

STEP

User configuration

Your gateway has a configuration interface allowing complete

control over the device’s behavior. In a Web browser, enter

192.168.0.1 in the address bar. In the screen that displays, enter

cusadmin as the username and password as the password.

2.4GHz

SSID:XXXXXXXXXXXX

PassPhrase:XXXXXXXXXXXX

5GHz

SSID:XXXXXXXXXXXX

PassPhrase:XXXXXXXXXXXX

Wireless

Devices

Cable

Computer

Power Adaptor

Summary of content (2 pages)

PAGE 1
QUICK START GUIDE HITRON CGNM-3552-ROG Check the box contents Read me first! STEP 1 1 CGNM-3552-ROG 1 POWER ADAPTOR Connect to the network Set up your wireless network QUICK START GUIDE Connect to the cable outlet STEP Connect to the power outlet Use the coaxial (not included) to connect the device’s CABLE connector to the cable outlet. 2 Connect to an Ethernet-equipped device (optional) STEP Use the Ethernet cable provided to connect one of the LAN ports to an Ethernet-equipped device.
PAGE 2
Setup Complete Congratulations! You have successfully set up your gateway. If you have any problems, see the sections below for help identifying the problem. IP addresses If your gateway is successfully connected to the network (see LED display) but you cannot access the Internet from a connected computer, your computer’s IP Address may be set up wrongly.