User's Manual

Screw
Orientation
Dimple
3. Install the sensor and magnet in a proper orientation
4.Close sensor’s housing
0.75"(1.9cm)
Mounting plate
Tape
Screw holes
Where not to place
(1) Metal can reduce transmission range
(2) Damp or very humid area
Test the Sensor from desired location before permanent
installation. Position the sensor’s mounting plate beside
the door or window frame on the wall and the magnet on
the door or window itself by using either double sided tape
or screws. They can be a maximum of 0.75” (1.9 cm) apart.
If aligned properly, you will be able to hear a 'click' when
they approach. When the door/window is opened, contact
is broken and the sensor sends a signal to activate the receiver(s).
Once you have confirmed the Sensor is
communicating, install it in its mounting
plate on the door or window frame.