User Manual

83
Please make sure all the following components are in the box.
Unpacking & Schematic Diagram
Trouble Shooting
1. If there is problem with sound quality.
a) Check if all the drivers are working.
b Check that audio cables are firmly connected at both ends.
2. If there is no sound from either of the speakers:
a Check if the device is on and if a source is playing.
b Check if the volume is not on minimum.
c Check if there is broken or short circuit with the cable connecting speakers and audio
source.
)
)
)
)
3. If there is no sound coming from one of the speakers:
a) Check the setting of the audio source.
b) Check that all the audio cable are firmly connected at both ends.
Break-in is the procedure which can enable the speakers to perform best acoustically. A
period ranging from 48-100 hours of usage is recommended before both the amplifier
and speaker drivers behave optimally.
Alternatively, you can listen 2 or 3 hours every day at a medium volume, and the
speakers will be broken-in one month or so.
a) Avoid magnetic disturbance.
b) Do not place under the sunshine for a long time.
c) Do not place in high temperature or moist environment for a long time.
d) Do not touch the drivers with your hands.
e) Avoid corrosive liquids and gases.
a) b) c) d) e)
Maintenance
Break-in
1
2
3
4
5
x 1
x 1
Manual
7
9
10
12
8
11
13
14
15 16
Master speaker
Slave speaker
COA XOPT
MUT E
POWER
VOL
AUX
VOL
BT
INP UT
Model: RC10
x 1
6
HiVi-Swans OS-10
Mul timed ia Acti ve Speaker Manual
Desi gn: HiV i-Swa ns