User manual

Digital Video Recorder User Manual
147
11.4.3 Checking Network Status
Purpose:
You can also check the network status and quick set the network parameters in this interface.
Steps:
1. Enter the Network Traffic interface.
Menu > Maintenance > Net Detect
2. Click the Network Detection tab to enter the Network Detection interface.
3. Click Status on the right bottom of the interface.
Figure 11. 29 Checking Network Status
If the network is normal the following message box pops out.
Figure 11. 30 Network Status Checking Result
If the message box pops out with other information instead of this one, you can click Network button to show
the quick setting interface of the network parameters.
Figure 11. 31 Network Parameters Configuration
11.4.4 Checking Network Statistics
Purpose:
You can check the network statistics to obtain the real-time information of the device.